Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Table size for seating 12.

Posts

Table size for seating 12.

#1

Table size for seating 12.

Dave Smith, Longview, WA

>I have a customer who needs a table to seat 12 people. How much room do I need for each person? Is there a standard width that is allowed for each seat?

The room where the table will be used is 10ft x 10ft. I suggested a fixed(no leaves) round table with a removable lazy susan. They have 8 children so they don't want to hassle with leaves.

Any suggestions on size I need before I have to reinvent the wheel?

Dave Smith

Too hot for us mossbacks in Longview, WA.

Re: Table size for seating 12.

#2

JL

Re: Table size for seating 12.

JL

>Well, we use 5' tables at church. These seat 7 comfortably and can seat 8. So that's about 2' per person. So using the same for 10 people, that would be a circumference of about 20', which would be about 6' 5" in diameter. Not much space for pulling out chairs in a 10' x 10' room :).

Re: Table size for seating 12.

#3

Allow 600-650mm per seat place around perimeter.

Andrew F in Australia

>

Re: Table size for seating 12.

#4

Re: Table size for seating 12.

Thomas S Stockton

>Dave

Usually 24" to 26" per person or more for arm chairs. so for 12 people you will need between 288" and 312" of circumfrence or between 92" and 99" diameter(if my math is right). thats a monster table for such a small room. you might want to consider a smaller round table with leaves. Is the room designed in such a way that the table can flow into the adjoining room?

Tom

Re: Table size for seating 12.

#5

JL

Re: My bad, I thought it was 10 people...

JL

>So using the formula of about 2' per person, that would be 24' in circumference, so that would be 7.64' in diameter.

(2' per person x 12 people = 24') 24' / pi =7.64'

Definitely not much room for chairs. Of course if you make it a round table with a hole in the center it might work :). That way you could shrink the table a bit and have a drop leaf that lets people into the center.

Re: Table size for seating 12.

#6

After some playing on CAD

Dave Smith, Longview, WA

>It looks like an oval table is going to give the maximum seating within the space available. But for 12 people they will need to eat with straight jackets on.

Dave Smith

Where are my smoke and mirrors, when I need them in Longview, WA?

Re: Table size for seating 12.

#7

Or, if you live in Washington State

Forrest Addy

>Or, if you live in Washington State allow about 25 to 27 inches. That gives elbow room. The standard dining table is 44" wide. Why so narrow I'll never know. I made a picnic table that was 50" wide and that allowed plenty of for the potato salad, the jello saldas, beverage containers, all the condiments, the meat platter, and the vegetables in the center in easy reach. No buffet or card tables for the overlow needed.

That said, all my family are tall rangy people, consumers of space and vituals, so a large dining table is a necessity. My sister's unwisely purchased beautiful furnature store oak table was usually covered with a sheet of plywood to give us all eating and serving room. More compactly constructed families' milage may vary.

Re: Table size for seating 12.

#8

Re: Table size for seating 12.

Glenn Madsen near San Francisco

>Sunday dinner at our place is currently 8+ adults, three grandkids, more on the way. The only way we manage is with two tables. It's Sunday dinner, twice a month. And it's in what used to be the family room of this house. We outgrew the dining room before they all got out of high school.

And two tables makes for better planning later, too. Eight kids aren't all going to be living there forever. At least, one hopes not. A smaller table adjusts better for that next portion of life. The two can be clipped together with table hardware, if you think it necessary. And you'll be better able to build, finish and move this beast into the house.

Unless it's Bill & Melinda's place...

Re: Table size for seating 12.

#9

Furniture Design Standards

Howard Acheson

>The Woodbin web sight has some excellent furniture design standards. Go to: www.woodbin.com/ref/furniture/index.htm and click on "Tables".

Re: Table size for seating 12.

#10

Re: Furniture Design Standards

Barry Irby

>Dave, You can't do a 92" round table in a ten foot room, for two or three reasons. One, you probably can't get a table close to eight feet in diameter through 6' 8" doors, at least not in one piece. Two, a table that big it's hard to reach the center. But the lazy Susan might solve that part, but people can't reach but so far toward the center while seated, so the stuff in the center is "lost" unless they stand up and even then it's pretty far to reach to the center of such a table., Third, you need to look at the space around the table. For half of it, you need enough room to pull the chair out and get in and out. For part of it you need enough room to circulate behind the seated person. There are Architectural and Graphics Standards books that will put some numbers on these. Fourth, Its not a good idea to have that many even closely related people an a ten by ten room. Who knows what might happen. Skip the table for now and help them enlarge the room. And one last thought, as a Wood Worker, I can build a table, but a table cloth is a whole other thing. Last table I built, I looked up "standerd" table clothes and built the table to fit.

Re: Table size for seating 12.

#11

Re: Table size for seating 12.

Thomas Skaggs, Foothills of Mount Level

>Dave,

You can make more money if you talk your client into 12 hand crafted tray tables. ;-)

Tommy

Re: Table size for seating 12.

#12

You Can NEVER Be Sure About Numbers.

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dave,

As you know, I am the father of 10. When we built a rectangular table to accommodate 8 kids, my wife produced my daughter Mary, our #3 daughter. Then the kids started to bring their friends home to the circus and it was common to have 12 or more kids at the table. Occasionally, we were joined by courageous adults.-----and still more kids. We never seemed to run out of room or food. I think a round table is best, although not sure about the lazy susan idea. The hole in the middle is where the spilled milk or maple syrup will go. DAMHIKT. In a big family it is inevitable as grape jelly between the piano keys.

All the talk about space requirements and room dimensions and seating capacities makes me chuckle, having lived through it personally. :<)

George

Re: Table size for seating 12.

#13

Mine does 12 easily

Tim Greif - West of Chicago

>I have an old oak dining table from a great-great grandparent that is 50" across and expands to 126" with all the leaves. It seats 12 comfortably and I believe we had 14 at it last christmas, although that was pushing it with two on the ends.

One thing I've noticed. If you plan to have a base with legs that extend out near the perimeter, it will limit where people can sit. Ours could probably seat more people if we weren't constrained on where the chair would fit beneath the table.

Re: Table size for seating 12.

#14

Re: Square peg in a round hole.....

Marv

>Hi Dave,

First you will need to know the dimension of each person's backside, not while standing butt when sitting. We older ones tend to spread out a bit when we sit. 12 people in a 10 x 10 room, no doubt with a doorway or two to allow ingress and egress is going to be a tight fit no matter what. Sounds a bit like pounding a square peg into a round hole. Remember when we had phone boothes and people would compete to see how many people would fit in one? Two feet per butt might not be enough for some of the larger ones in your case. Keep in mind that the Wendy and McDonald kids of our time are not as small as they used to be.

Perhaps you should suggest that they eat in shifts, maybe six at a time. While the first shift is eating, the second shift could do the serving. When the first shift is done, they would clear the table for the second shift. Once the second shift is seated, the first shift would then serve them. While each shift is eating the other shift could just stand around the perimeter for some friendly chat among all 12. The standing group could be allowed to have a beverage of their choice.

Marv

Re: Table size for seating 12.

#15

Re: Table for 12,

Mark Mandell - Gone Round In Jersey

>Room for 8. Don't need CAD, what you need is a chainsaw and a framing crew! Time to make a bigger dining room, Dave. Go back to the client and talk them into the remodeling job with the table as part of the deal.

How's THAT for a bit of Smoke & Mirrors??

|;-}}}

Re: Table size for seating 12.

#16

Re: Table size for seating 12.

Jesse in New Mexico

>Hey Dave,

My advice is that whatever you decide to propose to the client, mock up the tabletop by taping together some butcher paper or something, then place it in the room. My wife changed her specs real fast when she saw how big a twelve seater is.

If possible, you might try to talk him into two tables.

Re: Table size for seating 12.

#17

Dream On, Marv, Dream On :

George@Colonel's Workshop-Havertown PA

>

Re: Table size for seating 12.

#18

Re: Mine does 12 easily

John McGaw

>Since the room this new table is to be used in is 120" in either direction I guess that means it had better have a door that is wider than 50" so that the table can protrude. Or maybe the extra six inches can be made up by putting wedging the table between the walls at a slope...

Re: Table size for seating 12.

#19

Re: Table size for seating 12 -- solved!

John McGaw

>OK. I think I've figured it out in a way that won't require a lazy susan and will still fit into the room. What is needed is a table with a hole in the middle and a round bench to fit in that hole. The idea is that the 4 smallest children can (or are forced to) sit inside the hole and the remaining 8 diners sit around the outside. That handily takes care of having a table too deep for anyone to reach the center and if everyone around the edge stands fast it can prevent the rug rats from escaping the room. Problem solved.

Re: Table size for seating 12.

#20

Eating in shifts = riots

Dave Smith, Longview, WA

>