Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

How far can you push a scroll saw?

Posts

How far can you push a scroll saw?

#1

How far can you push a scroll saw?

Tom Colligan

>I don't forsee myself doing fret work but I wonder if a DeWalt 1.3 amp scroll saw could cut a handsaw handle of a hardwood.

This is the saw I'm considering and would use if for various components in furniture making, as well as making a saw handle.

Is it impractical to expect this machine to cut 4/4 hardwood? TIA, Tom.

Re: How far can you push a scroll saw?

#2

Ellis Walentine

Not at all impractical, Tom

Ellis Walentine

>Most modern scroll saws have enough muscle to cut up to 8/4 material without too much trouble. You will need to bone up on the types of blades and tooth configurations to use for your various scrollsaw tasks.

Go for it.

Ellis Walentine, Host

Re: How far can you push a scroll saw?

#3

Re: Not at all impractical, Tom

john lucas

>I agree with Ellis. I have the Dewalt and regularly saw 6 quarter inch thick patterns at once. It takes practice to cut thick wood and not twist the blade.

Re: How far can you push a scroll saw?

#4

Re: Not at all impractical, Tom

Terry Quiram

>Not to mention patience. You can't be in a hurry when cutting thicker than 4/4.

Terry

Re: How far can you push a scroll saw?

#5

Yep, you can

Stephen Kirk in Quakertown PA

>I have a really old pieced together saw that my grandfather rebuilt for me, hooked to a little motor beside it. With some patience and the right blade I've cut 4/4 thick hardwood with it. Beef up on the blade size or you may find yourself cutting angled and getting a barrel hump. Watch your tension on the blade too.

Re: How far can you push a scroll saw?

#6

Re: How far can you push a scroll saw?

George@Colonel's Workshop-Havertown PA

>Good Morning Tom,

My AMT scroll saw reminds me of a nasty little lap dog which snaps at my fingers and misbehaves maliciously unless I'm right on top of the work. I hate the damn thing. However, it WILL work and I've done interior intricate scroll work in 8/4 ash. It was a successful, but unpleasant adventure which gave me no pleasure. Tension and choice of blade is important. Once you find an effective blade, get several more just like it. They break easily. I understand the DeWalt is several hundred light years ahead of my saw. So your outcome is assured.

George

Re: How far can you push a scroll saw?

#7

Thanks to all but a clarification is needed.

Tom Colligan

>I take it the principal would be the same as on a BS? For thicker stock a blade with fewer tpi is best and with greater tension as well? Thanks again, Tom.

Re: How far can you push a scroll saw?

#8

Ellis Walentine

That would be my rule of thumb...

Ellis Walentine

>...although you won't find blades with 2 or 3 teeth per inch, so you are likely to have some unavoidable buildup of dust in the cut. I will defer to some of our more experienced scrollers on this.

Ellis