Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Brad Nailers

Posts

Brad Nailers

#1

Brad Nailers

Bill Kay

>I need a brad nailer and I'm looking for a recommendation.

I'd like one that would handle 5/8 to 2" 18 gauge brads.

I tried one from Harbor Freight and it died after the second brad.

I did a search but didn't find many recommendations. Mostly discussions about brad versus staple.

Thanks

Re: Brad Nailers

#2

Re: Brad Nailers *LINK*

Sawdust Everywhere!

>Bill,

I got the Bostitch SB-1850BN. Had it for 5 years. Have already put though a couple of thousand brads thru it. No problems. No jams at all. Would get it again. It has nice adjustable exhaust and depth set feature. Plenty powerful.

I think Wood magazine did a review on 18G brad nailers about a year or so ago. May want to check out the review.


SB-1850BN

Re: Brad Nailers

#3

Re: Brad Nailers

Larry Clinton At Frankfort (Central)., Indiana

>I have one of the cheaper Senco units - Finish Pro 18 gage - It shoots 1/2 to 2" brads. I have used it in the shop on several projects and my son has been remodeling his house, we have shot several thousand brads without any problems. It is pretty easy to adjust the countersink. We are using this in mostly white oak trim - much of it 3/4" thick and have had no problems shooting through and seating the brads. If it wears out I would buy another just like it.

Re: Brad Nailers

#4

Re: Brad Nailers - Porter Cable

Glenn Madsen near San Francisco

>I got started on Porter Cable, because a neighbor friend liked his. Bought the kit from Amazon at a deal, and have been working with it for six or eight years now. The BN125 came with the kit, and wouldn't do 2" 18 ga, so I bought the one that does (BN200?). MOST of the time, a 2"18 ga is just fine, but sometimes they wander, or crumple, and get to be a pain. Sometimes, when your off-hand is in the wrong place, you have to extract the brad from your finger. DAMHIKT. I bought a 16 ga version for longer brads, and don't have that problem any longer.

There are plenty of nailers out there. Find a good line, and stay within it, and you'll be all right.

Re: Brad Nailers

#5

No Complaints With My Bostitch Either

Dave's Not Here

>

Re: Brad Nailers

#6

Re: Brad Nailers - Porter Cable

Ken Oakley-Sunny St. Cloud, Fla.

>I have a Porter Cable also and it has lasted longer then the previous two which were a Campbell-Hausfield and an Airy. Used Paslodes for many years when I worked for a living. They were good but pricey.

Re: Brad Nailers

#7

Re: Brad Nailers

Barry Irby

>Took my Senco finish nailer to the shop for an overhaul. Only had it about twenty five years so I guess it was due. While I was there I chatted the guy up a bit. they have many brands of equipment they sell and I asked if they saw one emerging as a good one. They pointed out MAX brand. All of mine are Senco and I like them and based on my experience, I would recommend them, but I thought I would throw outt he comment about the MAX stuff. Don't own one, never even seen one, but that is what the guy at the store liked best.

Re: Brad Nailers

#8

Ever Hear A Street Vendor Yell "Rotten Fish"?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Barry,

I never heard of that brand either. So it may or may not be good. My guess is that the glowing recommendation was somewhat tied to the percentage markup of comparitive tools. Disclaimer: I am frequently wrong and getting better at it.

George

Re: Brad Nailers

#9

Re: Brad Nailers

Bill Kay

>Thanks everyone for the responses and recommendations. I'm going to run on over to the tool store and buy a real brad nailer

Regards,

Bill

Re: Brad Nailers

#10

Re: Brad Nailers

Stuart Hough

>I've had my Bostich for about two years and have had zero problems. It works wonderfully, is virtually maintenance-free, lightweight as all get-out, and has never given me a bit of trouble. You won't go wrong with one.

Re: Brad Nailers

#11

Re: Brad Nailers - Porter Cable

Bill White

>Ditto on the PC. Have the 16 and 18 Ga. Keep 'em clean and oiled. Good value and you can get the repair kits.

Bill

Re: Brad Nailers

#12

Re: Brad Nailers

Mark Mandell - Gone Round In Jersey

>I've had my Senco FP-25 for a number of years. Never a hitch or jam. Got the power to spare to nail oak. Oil-free is the best in my view. I now use it only for trim carpentry rather than furniture though, since I moved on from Norm's "put a brad in it 'till the glue dries" style of woodworking.

BTW, my 16ga finish nailer is the Bostich oil-free. Thing will drive nails in concrete!

mm