Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Chest design?

Posts

Chest design?

#1

JL

Chest design?

JL

>I'm thinking about making a table/chest. Sort of an end table/chest. Make a small chest (18" x 24" x 18" H) and put it on a small stand (with or without a drawer).

With tables, I typically use buttons to attach the tabletop to the apron. When I've made boxes, I typically just attach the top to the sides. As chests are larger, I figure I'm going to have to have some way to take the larger amount of wood movement into account (or find some nice 1/4 sawn wood).

My first thought was to rabbet the edges of the top and bottom panels and have a dadoed cut in the side panels and use 1/4" space balls to hold the top and bottom panels securely. Any other thoughts on good ways to do this?

TIA

Re: Chest design?

#2

Re: Chest design?

John McGaw

>I'm not visualizing what you are aiming for. When I think "chest" the first impression is something that has an opening top as in a Shaker chest or a chest on drawer. Is the top of your chest to open? Is it to be the same size as the body below it?

One idea I've used in the carcase of a desk is to dovetail the top to the sides to the bottom which avoids cross-grain. Variably spaced dovetails of different widths looked nice in the cherry desk I made. If there are to be drawers then they could be inset and separated by dividing rails dovetailed into the front. A single door could be easily inset also. For the back I'd probably route a 1/4" slot 1/2" in from the rear edge of the four carcase panels and then fit a floating raised panel. I've sometimes used nothing more than a square rebate in the edge of the panel in cases like this, keeping it narrow enough so that there is only a narrow reveal all the way around when it is installed to create a nice shadow line.

Re: Chest design?

#3

JL

Re: Chest design?

JL

>Probably wasn't clear enough then.

I want to make a small chest (or very large box). The chest will have hinges and open as a chest. Think of a tea chest. The chest will sit on a short stand. If the stand is tall enough, I will put a shallow drawer in it.