Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Shaker Side Table

Posts

Shaker Side Table

#1

Shaker Side Table

Mac in Indy

>Well I have needed to get ready for a class I'm teaching in August for the last month. Since my family left July 4 to go see family in Virginia what better use of my time than to get out to the shop and build the prototype and doccument it for my class handout. I'm actually making 3 as I want one built, one in parts to use as a show and tell example and one for a friend. I'll build up the show and tell unit duriing class. we only have 3 days to build this table but ............ well we'll see! I'll be the first to admit that I'm a very deliberate woodworker (slow) but I have found that doccumenting in pix and notes really doubles my construction time. I've also gotten so much more attuned to grain and color matching when laying out the parts on the rough lumber and that slows down layout but results in a much nicer product. Well here's what I've gotten done this week:

Photo Sharing and Video Hosting at Photobucket

There are the two partially assembled tables into which I just fitted the drawer fronts before I quit for the night. That little pile of parts behind the two tables is the show and tell parts of the third table. The three table tops are glued up and stacked to the right awaiting sizing and sanding tomorrow. Then the pile of maple right under the table on the right is to be resawn tomorrow for the drawer boxes (6/4 is all I had in the attic stash). It is some gorgeous curly maple that I didn't realize was quite so curly when I began to saw it up. When I started jointing it the curl just about floored me! Excuse the yellow hue (incandescents) to the pic but look at that curl!

Photo Sharing and Video Hosting at Photobucket

They are going to be some nice looking drawers! Well I hope to finish by the time the weekend is over! Boy now I understand why Norm builds a prototype, it let's you find all the places to make mistakes the first time through and hopefully avoid them in class! Next week I'll start editing the pics into the handout. I've found I really like the teaching which is a big surprise to me. It feels good to pass on some of that hard earned knowledge.

Mac

Re: Shaker Side Table

#2

Way to Go!

Jim Shaver - Oakville, Ontario

>Very Nice Mac,

I have always liked your work...I sure hope you get Paid Well for your skill and time....3 days is a Norm Fast project!

Take care,

Jim

Re: Shaker Side Table

#3

Re: Way to Go!

Mac in Indy

>Thanks Jim. That's high praise coming from you as I have always liked the projects you have done (especially those Morris Chairs).

Yes I get compensated for my 3 days at the school but I put in way too much time preping for the classes to think I make good money doing this. I do enjoy it, it allows me to pass on the craft to others which I think we all need to do, I learn a lot about the way I do things by doccumenting it for a class handout. It makes you question why you do things certain ways and always during class and prep time I learn new things too. It has certainly made me a better woodworker.

Mac