Anybody has this? If so, comments? *LINK*
HC Sakman
>It looks (with specs.) promising.
Any first hand experience with this machine?
TIA,
Chico...
Grizzly Planer/Jointer Combo
Knowledge You Can Build On — Est. 1998
Anybody has this? If so, comments? *LINK*
HC Sakman
>It looks (with specs.) promising.
Any first hand experience with this machine?
TIA,
Chico...
Grizzly Planer/Jointer Combo
Not this one, but similar.
Andrew F in Australia
>Hi Chico,
I don't have this one but something similar.
You need to **really** carefully plan your workflow, as you need to drop the thicknesser bed to 70mm or so to get the jointer working. So, if you make a creative interpretation of a correct dimension, it's a lot of fiddling around to get something planed to correct size again.
You need to do all your jointing, then go to the thicknesser. Forget a bit and you're shot.
THe upside is that it's a lot less space in the workshop.
Cheers,
Andrew
No, But,
Bartee ( Metro Atlanta )
>I am also very interested in this machine.
I have seen this same question on other forums and no one has one yet.
I am ready for new jointer, but really do not see stopping at 8".
Also my basement workshop, will be fit a long 12" jointer.
So whoever get's one first please let us know what you think....
Maybe one of the magazines will do a test soon.
Re: Anybody has this? If so, comments?
Mike Fitterling
>Wood Central is always a good place to get information, but as this machine is so new, few have it. When you register a machine with Grizzly you have the option to allow Grizzly to give your contact information to potential customers. The system works pretty well. I would suggest calling Grizzly and asking them for a reference to someone who has bought one. I just got an email a couple days ago about my Grizzly planer and was able to offer my opinion, and hopefully, some useful information, and made a new friend to boot!
For someone with limited space, that sure looks like an interesting solution.
Cheers,
Mike
Re: Anybody has this? If so, comments?
Scott in Montana
>Good Morning!
I do not have this machine but have the machine it is probably a copy of, a machine that Delta imported 10 years ago when collaborating with a European manufacturer (Kitty?). While it is true that you will have to rethink your jointer/planer work patterns, the price is right. The Delta machine was $2500 ten years ago. I love the ability to face join wide stock and all of the floor space I gained.
I have had no problems switching back and forth from planning and joining. The planer bed remains where I left it and the jointer beds don't seem to change at all. So, it's just a matter of inconvenience for me, not having the set up change. Now, this is on the Delta, not the Grizzly; but they look very similar.
I am considering buying a spiral cutting head for my machine but the price gives me heavy contemplation.
Scott