Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Laser guides for RAS????

Posts

Laser guides for RAS????

#1

Laser guides for RAS????

Ron Bauman

>Do any of you have experience with laser guides on a Radial Arm Saw. Mine is a Craftsman that I basically use as a cutoff saw. I recently was cutting some 4"+ White Oak and needed to flip it over to cut the thickness. It was not bad sighting back through the cut to center the blade, but I thought that maybe a laser guide would help be a bit more accurate. I've looked a bit on the net, but not really found anything that suits my purpose. What do you think and what brands have you used? TIA for your help.

Re: Laser guides for RAS????

#2

Oddly, ...

Ellis Walentine, Host

>...Craftsman makes a laser for chop saws that goes right on the arbor next to the blade. It's been a few years since it was introduced, but it may still be in Sears's lineup.

Ellis Walentine, Host

Re: Laser guides for RAS????

#3

Re: Laser guides for RAS???? *LINK*

albertabob

>Do a search for Irwin. I put one on my CMS and it seens it would fit the RAS as well.


Irwin CMS laser guide

Re: Laser guides for RAS????

#4

Re: Laser guides for RAS????

George (Oxford, NC)

>I have the Irwin as well on my CMS. I got it in a package deal, blade and laser guide, for a good (forgotten) sale price. Works well on the CMS and would probably work as well on the RAS. Only thing is that the blade has to be turning for it to come on.

George