Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Concrete Counter tops *LINK*

Posts

Concrete Counter tops *LINK*

#1

Concrete Counter tops *LINK*

doug f, san clemente, ca

>Anyone have any experience with concrete counter tops? We're designing and building a new vanity and cabinets for my son's remodeled master bath and he's seen concrete tops that he loves, the one below in particular. Any advice on structural issues, maintenance, durability, etc. would be appreciated.

Thanks, as always, for your help.

Doug


http://pourfolio.com/products.html

Re: Concrete Counter tops *LINK*

#2

Re: Concrete Counter tops *LINK*

Ron Hildreth, Alta, Iowa

>Doug,

A friend and fellow Iowian woodworker who frequents WC is Dave Bonde, though I haven't seen him on here for quite some time, introduced me to making your own concrete countertops by lending me a video he had showing step by step how to make them. I also bookmarked the website where you can order the same video. Pretty interesting, but it seemed to be a long process that would take up a lot of valuable shop space until the project was complete through the curing stage. It's not all that hard to do, provided you have the proper tools, space, time, and materials.

The link below will take you to the website. Before you start your project, do your homework so you know what is involved and what your getting into! Lots of luck and keep us posted if you proceed!

Ron in Iowa


http://www.concreteexchange.com/

Re: Concrete Counter tops *LINK*

#3

Lee Gordon

Re: Concrete Counter tops

Lee Gordon

>The new issue (July/August 2007) of This Old House Magazine has a feature story on concrete countertops.

Re: Concrete Counter tops *LINK*

#4

Re: Concrete Counter tops

Brian Altman

>I did a bit over 110 sq ft of concrete counters for my kitchen , laundry room, and writing desk. Get the Cheng video or book from the concrete exchange web site. Making the tops was not that difficult. The hardest part was the wet grinding to polish the tops. I crushed some red rocks and black rocks and spread them on the bottom of the mold (poured up side down)and ground down till they showed. Also set in some perferated stainless next to the stove. Also my tops were a full 2" thick and I needed to get a few guys from the gym to help carry them into the house! I'm no pro, but learned a bunch by doing it. I will never do a job that big, but my wife says I am doing a vanity top for our lower level bath ;-) Drop an email if you have any questions.

Brian


img

Re: Concrete Counter tops *LINK*

#5

Re: Concrete Counter tops

doug f, san clemente, ca

>Brian - Fantastic looking kitchen! You did a great job!

How have maintenance and durability been? Chips, dings, stains, knife cuts, etc.?

Thanks for the response.

Doug

Re: Concrete Counter tops *LINK*

#6

Re: Concrete Counter tops

Clay Foster

>I made this sink surround for our kitchen. It may not show in the photo, but all the surfaces slope toward the underneath mounted sink.

Every hour spent on making a good mold is two hours not spent trying to fix imperfections in the concrete. It's amazing the detail concrete will reproduce, right down to 100 grit sanding marks. I didn't grind the surface to expose aggregate, but I did wet sand it with silicon carbide sanding paper down to 600 grit, and got a really smooth, polished surface.

Water left on it for sevreral hours won't leave a mark, but left for several days it will leave a ghost image. These probably could be polished out, but I'm going to wait until there are enough of them to make it worthwhile. Or I might just let enough of them develop to declare it a rich patina. Otherwise, there's been no stains or chips in two years. We're pleased with it, and would do it again.

There are ammonites embedded on both sides. The rest of the countertop is made form spalted quartersawn sycamore.


img

Re: Concrete Counter tops *LINK*

#7

Re: Concrete Counter tops

Brian Altman

>No runs, no drips, no errors.

Oh that is something else! Did a sealer by Miracle. Held up great. The tops are one year old now. Looks as good as the day they were finished. No cracks chips or anything bad. They are great counter tops. Easy up keep.

Brian

Re: Concrete Counter tops *LINK*

#8

Re: Concrete Counter tops

Bob McGovern

>Materials cheap, labor extensive. Every set I do, I swear I won't do another. Then I do another.

Results vary; must have a relaxed 'ballpark' attitude about color and grainyness. Or be willing to try again. Heavy, hot, messy, space-consuming work. But the results can be quite nice. Your sealer choices run from None (will stain and patina), to very simple (oil and/or wax) to subsurface (easy to replenish, but needs it often) to thin film (good compromise) to full film (poly or marine epoxy). Depends how 'stony' versus how 'sealed' you want it.

If exposing aggragate, spend time finding cool aggragate & making samples. The same gravel ground more or less can look very different. Shape & size matter for appearance. You can toss in jasper, stained glass, metal, all kinds of stuff.

Re: Concrete Counter tops *LINK*

#9

Re: Concrete Counter tops

Brian Altman

>Clay,

Yours look great also. It is amazing what you can do with concrete. Embedding things is neat. We had trouble limiting what we embedded so as not to go over board. I used a wet grinder with diamond pads. from 50 grit to 3000 as a finish.

I really like the detail on your cabinet doors!

I build tables out in the garage to make the molds and pour and grind. Didn't want to do all that grinding on the garage floor and kill my back.

It is amazing what does transfer to the concrete. I used melamine for the molds. and got a smooth surface. I think next time I will not grind thru the agregate. Here is a picture of the stainless embedded next to the stove. You can see how it is ground down to the aggregate.


img

Re: Concrete Counter tops *LINK*

#10

Re: Concrete Counter tops

Brian Altman

>All poured before I turned them over


img

Re: Concrete Counter tops *LINK*

#11

Re: Concrete Counter tops

Brian Altman

>Here are some of the molds before the pour


img

Re: Concrete Counter tops *LINK*

#12

Re: Concrete Counter tops

Brian Altman

>Here is me grinding. Took about 3 weeks to get it done. My hands were killing me when I was finished. Wore a poncho for all that time.


img

Re: Concrete Counter tops *LINK*

#13

Re: Concrete Counter tops

wes bischel

>Another vote for the Cheng book. Very informative.

Wes

Re: Concrete Counter tops *LINK*

#14

Concrete Counter tops..... Ideas *LINK*

Eddie Pacheco, San Jose, Ca.

>Not trying to steer the postings. I was looking on Craigslist for a design job (looking for xtra spending money) and found a listing by the company below. They make some pretty nice stuff and I thought you could get some design ideas from here.

Brian, really nice work on your kitchen and it looks like you put the "B" in elbow grease.


http://concreteworks.com/cw_flash/main.html

Re: Concrete Counter tops *LINK*

#15

Re: tips on concrete color

Robin Corell in Atascadero, CA

>for best results on coloring concret it is best to start with white cement. Riverside white is a truer white than lehigh,the lehigh tends to be a bit blue in tone. 100% consistant and repeatable colors are possible and not too dificult. the key is to use synthitic pigments rather than organic which fade more quickly. Use Davis brand pigments in red, yellow, and black. blue and green are available but seldom look like stone. for brown mix all three.They sell 1 lb samples for very resonable prices. these colors are powerful and most of my recipes call for a couple hundred grams/hundred pounds of cement with a good black achieved with 600 grams/hundred lbs cament. I weigh the powdered pigments with a triple beam ballance scale and dry mix them with the cement by first sending the pigment through a extra fine brass screen, the finest I could find. the screen breaks up the clumps of pigment and dry mixing distributes it consistantly which allows me to mix up small batches acording to my recipe.

To mix up color samples I weigh out 10 lbs of cement and weigh out the pigment by placing it on a square of glossy magazine paper, less pigment will stick to it than to the scale or to other papers. I start on the high end of where I think I will want to be because I can take 5 pounds of the color/cement mix and add 5 lbs of white for half the color or what ever other fractions I think I will want. remember to mix the sample with the same agregates and in the same proportions or the color will look diferent.

The wet cement will be significantly darker than when it drys. be careful when force drying it as you can actually fade it with by putting it in too hot of an oven. nothing about concrete counters is fast this is a good place to start learning that. write on the back of each color with a sharpie before you demold it or sand it. once you do more than two it can get real confusing.

Have fun and always wear gloves AND eye protection when working with cement.

Robin Corell

Re: Concrete Counter tops *LINK*

#16

Re: Concrete Counter tops

Steve Schoene

>The most recent issue of Consumer Reports has articles about kitchen coutertop materials. They do have some reservations about concrete tops as I recall. It's probably worth a read to get a different perspective.

Re: Concrete Counter tops *LINK*

#17

Been there, done that . . .

Ted Wong

>. . . twice. It's an awful lot of work to do yourself. But the creative aspects are limiless and the process is exciting. By the way if you don't have the tools and equipment already on hand it can be expensive. I think the first time around I spent almost $900.00 for tools, supplies and materials for a 2" x 24" x 102" countertop.