Where Hardwood Lumber Comes From 9-steaming walnut
Bill Tindal, E.TN
>Part 9 Processing Walnut Lumber
Every pack of commercial walnut lumber that I ever saw for sale was steamed, a controversial practice among armature woodworkers. In this part I will show that the fretting over steaming is unfounded.
The sapwood of walnut is white and most woodworkers and all furniture factories find it an unattractive addition to furniture made from walnut. Most of the good walnut logs go for veneering. The highest grade lumber is on the outside of the log. When small logs are sawed the clearest lumber will have a lot of sapwood (recall that sap is not a defect by NHLA standards). Hence, the practice of steaming was developed to almost turn sapwood into heartwood.
It has been found that when fresh cut walnut lumber is heated in wet steam that the sapwood turns nearly the color of the heartwood (when it is done properly). This process is called steaming. A very large walnut steaming operation was located near where I lived and from working with them on a couple of problems I thought I knew about steaming. Just before the death of Jon Arno I argued with him about how steaming works. I lost and in his memory planted a walnut tree on the farm. Some spring I will post its picture as a reminder of Jon, but I digress....
The process does not involve diffusing pigment from heartwood to sapwood. All that is required to properly steam is to get the sap wood to a temperature around the boiling point of water in the presence of wet steam and the sapwood will turn black. You can do the experiment in your pressure cooker. (more on that later)
A typical steamer is shown in this picture. The silver things on each side are huge aluminum doors, aluminum because the iron doors corroded away in a few months from the wood extracts. One �dead pack� of walnut has been put in the steamer. A dead pack is a pack of lumber with out sticks between the layers. Once this chamber is filled with packs of walnut it will be shut up and steam from a boiler introduced for a couple of days until everything is hot and soggy. A pleasant odor of furfural seeps out of the steamer indicating some decomposition of the cellulose. A furniture factory owner told me that steamed walnut processed better in his factory, perhaps due to some alteration of the wood during steaming.
What went into the steamer brown and purple and white now comes out of the steamer looking like it has been blackened with soot. This change is the objection of many amateur woodworkers. Their complaint is that kiln dried (really steamed) walnut looses it color character, and they are correct. Once the soot is planed off the walnut will be a uniform brownish-black. How ever this difference is irrelevant in the long run. Continued in the companion post below




