Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Wood Planes

Posts

Wood Planes

#1

Wood Planes

William Christian

>I am retired and basically new to woodworking on a full-time basis. I have quite a collection of tools but I will need some planes. What type of planes would you reccomend for a starter like me who intends to get into woodworking on a full-time basis making outdoor and indoor furniture?

Re: Wood Planes

#2

Re: Wood Planes

Tony - Memphis

>You might get more responses over on the Hand Tool board.

I use a #4 smoother and a low angle block plane a lot. The #4 is pretty versatile, especially for someone who mixes power and hand tools. I have also learned to appreciate a shoulder plane and a rabbet block plane. I bought my #4 online and added a Hock iron. It is a real pleasure to use. I have a Lie Nielsen low angle block that was a gift that I use all the time.

Got any card scrapers? Those are wonderful tools that sort of fall into the plane category.

After you get a couple of niceplanes, you'll need something to sharpen with. That's a whole 'nother ball of yarn. But it is important to have your blades as sharp as you can get them. Otherwise, its more frustrating than anything.

Congrats on your retirement and welcome to this sickness we call woodworking! The folks over in the hand tools area can hellp more than I did, just remember to point how what you plan to do with the tools and even what types of wood (you mentioned outdoor furniture which can be made from really hard stuff or really soft stuff and that makes a difference in the tools/angles/etc.).

Tony

Re: Wood Planes

#3

Re: Wood Planes

Jesse in New Mexico

>Agree with the advice above. Also consider making your own special purpose planes (for a particular curve for instance). You can buy excellent irons and caps (try Hock brand) and make the rest out of wood. There are a few good books out there and several web articles.

Re: Wood Planes

#4

begin with a Stanley old enough to be made well

Bill Tindal, E.TN

>I wish I had followed my advice. Learn to use this plane. You might want to fit it with an aftermarket iron- LV or Hock. It will be fine for fitting things. I think it will be fine for everything except some surface planing. After a bit see where your interest lie and go that direction- new LN or LV, wood, high dollar smoother, ???, or stick with th eStanley.

PS ask this question on the hand tool forum to get a long discussion.

Re: Wood Planes

#5

Jim in Burlington Ont.

Couple video's

Jim in Burlington On

>First I'd buy a copy of Jim Kingshott's Special planes and Bench planes. Skip lusting after the big money British Patent planes.

Budget and knowledge will guide you some after you watch those 2 video's. If you've got time and some know how, old planes can work very well. Used stanely's sweetheart's have nice blades and Lee Valley A2 replacement are nicer IMO. A few moulding planes simple to use and sharpen. My short list right now is a 16" wooden jointer , Stanley 605 One curved blade one square blade, a LV bevel up jack Low angle and 38 degree angle blade , LV pocket plane , LV medium shoulder plane. Homemade scratch stock might put some nice edge detail on cheaply.

Re: Wood Planes

#6

Re: Wood Planes

Ernie Miller

>it really comes down to what you are going to be doing. if you buy you lumber S2S then a block plane may be the place to start for fetting joints. if you are using longer boards and are needing to glue them together you may and a jointer for your edge glueing but there are sone reall nice table saw blades out there that make edge jointing pretty much a thing of the past It is going to come dow to the project at hand. I would suggest maybe a Steve Knight plane if you are wanting an economical new plane they are hand made wood bodied planes thet work well. Visit the hand tool side for more answers buy them as you need them of if you find one cheap on you travils for vintage planes