Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Color wheel of Misfortune....

Posts

Color wheel of Misfortune....

#1

Alan Young

Color wheel of Misfortune....

Alan Young

>I was commissioned to build a couple of occasional tables.




I built the tables from Maple as the flooring in the room where the tables will live is maple. But the client wants the color tone to match a round table she already has in the room. I'm not sure exactly what wood this is but I think it is teak-


So I want to "tone" a stain that will match this round table. I bought one of these color wheels


The client and I compared the table to the wheel and concluded that we want the tone of Burnt Umber in the 30% to 40% range.

So then I bought some toners from Mixol-thinking I could tone my own laquer.. Well when I opened the package-I find the Mixol doesn't refer to any of the artists wheel terms- ie Burnt Umber Raw Siena etc...rather the Mixol terms are rather generic- in various shades of given colors- So I have to guess which colors are going to result in mixture yielding the Burnt Umber.....

Should abandon the Mixol and get something else?

Help me Vanna

Alan

Re: Color wheel of Misfortune....

#2

Re: Color wheel of Misfortune....

George@Colonel's Workshop-Havertown PA

>Hello Allan,

Why not call Mixol or email them and give them the details. Knowing the customer's choice of wheel mixture, they ought to be able to give you the correct ratios. I bet you could nail it yourself given a little experimentation.

George

Re: Color wheel of Misfortune....

#3

Alan Young

I just contacted the Horse

Alan Young

>Thanks George,

I googled and found a USA Mixol site. I sent them the dilemma and I await await their response.

Alan

Re: Color wheel of Misfortune....

#4

Re: Color wheel of Misfortune....

Ed Mulligan, Cape Cod

>Alan -

The burnt umber in the color wheel looks like a greenish brown while the client's round table appears to be a faded pink on my screen. I don't see how burnt umber would do the job.

If I were matching the color of the client's round table I would

1. using your Mixol kit, prepare sample stains on maple scrap. Apply finish to get the final color effect.

2. bring the samples to the client or bring the round table to your shop, and compare them. Sunlight is best for this.

3. probably none of your samples will be exactly right. Select the one that's closest and tweak it until it is right. My guess is a very dilute red is a good place to start. If it looks too red on the sample, add small amounts of green.

Ed

Re: Color wheel of Misfortune....

#5

Alan Young

Thanks Ed

Alan Young

>I'll experiment with that color scheme.

I did bring the table to my place so I can make close comparisons.

Alan

Re: Color wheel of Misfortune....

#6

Re: Color wheel of Misfortune....

Ernie Miller

>Not that it is going to do any good now but we have a excelant good old fashioned lumber yard here in town I can take some scraps and a drawer or the itme to be matched and they will do it for me if I buy the product from them This guy is great and allways gets thing real close but he has been doing it for cliants for 20 years or beter some time it takes one coat of stain others it will take three coats of stains and fillers.