Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Grizzly 8" G1018 Purchase Questions

Posts

Grizzly 8" G1018 Purchase Questions

#1

Grizzly 8" G1018 Purchase Questions

James

>Hey All,

I've got a line on a G1018 up here in never never land for $500. It's the one with the wands and not the wheels. Is it a decent jointer? Am I gonna have issues with the wand and trying to adjust it? Need some feedback from you great folks

Thanks

James

Re: Grizzly 8" G1018 Purchase Questions

#2

Re: Grizzly 8" G1018 Purchase Questions

Howard Norman-Prescott, AZ

>I can't comment on that particular model of Grizzly 8" jointers but I have the G0490 8" jointer. It has the "wands" for adjustment also. I haven't had any problems with the adjustments.

Howard

Re: Grizzly 8" G1018 Purchase Questions

#3

Re: Grizzly 8" G1018 Purchase Questions

Tony - Memphis

>I have a Griz 6" with the levers and I have never had any issues. I don't think I've adjusted the depth of cut in years. When I do a knife change, I adjust the outfeed just a bit. Never a problem though. I don't really see what the big deal is about lever vs wheel and I've used both. My relationship with Griz started out rocky and I doubt I'll buy anything else from them, but my jointer has been a pleasure to own and use. Wish I could have afforded the 8". Someday! Enjoy your new toy if you end up getting it. Check it out real well first!

Tony

Re: Grizzly 8" G1018 Purchase Questions

#4

Re: Grizzly 8" G1018 Purchase Questions

Larry Clinton At Frankfort (Central)., Indiana

>I personally believe Grizzly jointer's are as good as anyones on the market today. I have owned two, the first was a 6" with the lever adjustment - it served me well for about 15 years and was sold to a friend when I upgraded to the 8" GO 593 with the spiral head. The 593 has the wheel adjustment. I seldom make an adjustment to the cutting depth, but really haven't seen any issue with either type of adjustment. I had no problems with the "lever" nor do I have any with the wheel.

Re: Grizzly 8" G1018 Purchase Questions

#5

Re: Grizzly 8" G1018 Purchase Questions

Patrick Schupbach

>I have the G0490 and have had no problems whatsoever. It was dead on out of the crate. Good luck with your decision!!

Re: Grizzly 8" G1018 Purchase Questions

#6

Re: Grizzly 8" G1018 Purchase Questions

Larry Marker in Alabama

>I tried to buy the 8 inch with wheels when it first came out and it was on backorder so long that I gave up and switched the order to the 1018. I am super happy with it and have no regrets.

I found the lever adjustment is quite satisfactory, and like many others have said -- I never readjust the tables once I got it set up.

That's a good price if it's in good shape. You won't regret it.

Larry

Re: Grizzly 8" G1018 Purchase Questions

#7

Re: Grizzly 8" G1018 Purchase Questions

Steve Roxberg

>I bought a used G1018 and love it. $500 is top dollar for a used one though. I paid $400 with a mobile base and knife setting jig. I'd buy it but try and get them to $400.

Grizzly is selling new 8" jointers for just under $600.

Re: Grizzly 8" G1018 Purchase Questions

#8

Re: Grizzly 8" G1018 Purchase Questions

David Harker

>I have a g1018, with the handwheels.

It is great. I cannot comment on adjustments, I just set it at 1/32" when I got it, and have never changed it.

Good luck, and I also think the price is high.

Dave