Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

outdoor lumber for chairs!!!

Posts

outdoor lumber for chairs!!!

#1

outdoor lumber for chairs!!!

Scott S.

>I am looking into building some adron. chairs for the outdoors. I live in Northwest Illinois. SO they will be out for the rain and heat and little cold. I was looking into building them out of plain old cedar from the local lumder yard. I think that is boring though. I would like to know what anyone would use other than that. We have got a lumber guy in the area that is AWESOME!!! Johnson Creek Hardwoods. He has got some red elm that I was thinking about. It is pretty and something differnet. It is available in 4/4, 6/4 and 8/4, so I can get some bulk to the chair.

What is a good finish to put on the project as well, poly or what.

Re: outdoor lumber for chairs!!!

#2

Re: outdoor lumber for chairs!!!

Basil

>Red Elm will be pretty in my opinion but it won't last like cedar out in the weather. Walnut, white oak or cedar would be my first choices.

But if you like elm, go with it. Since you seem to want something in the "looks" department, you're going to have to treat it. May I suggest a 'clear wood preserver' with a UV screen. LOWES used to sell some that wasn't real expensive and it worked (Stunk to high heaven, went on like diesel fuel and had a touch of poly in it). I put 3 coats of perserver and 2 coats of spar ureathane on an out building once (white oak siding). It held it's color and appearence well for about 8 years before beginning to show signs of weathering. Down side was that it turned the wood slightly yellow (yellowish tint, maybe gold?).

If you go with elm, you might want to use some stain to bring out the grain. Slab sawn elm really has some beautiful feather grain.

Re: outdoor lumber for chairs!!!

#3

Teak, cypress, ipe?

Rod Peterson -- Ormond Beach

>When Norm (The New Yankee Workshop, if anyone didn't know) built first an Adirondack chair, and then fourteen years later an Adirondack love seat, he used cypress (reclaimed, river bottom). In the second project, he reported on the durability of the product from the first project.

Goodwin in Micanopy, FL, is the supplier Norm used (and featured). I think he prices his lumber by the Troy ounce, but cypress probably won't be cheap no matter where you get it.

I just mentioned the other two woods to get your attention. Teak, of course, would be pretty good, but even more expensive than cypress. I don't know about ipe for ground contact, but for weather survivability it out to be outstanding.

Rod

Re: outdoor lumber for chairs!!!

#4

I'd bet ipe is fine with ground contact... But...

John in New Mexico

>stuff is so darn hard it'll wreck any non-carbide tooling FAST. It's also hard to finish if you don't want the grey look, since penetrating oils don't seem to penetrate. And you want to talk about heavy?

Anyway, great stuff for decking and flooring, but I would probably use one of the other options myself - I'm very partial to teak, but it is pricey.

John

Re: outdoor lumber for chairs!!!

#5

Re: outdoor lumber for chairs!!!

Terry Quiram

>Scott

I have a friend that made outdoor furniture out of Osage. They have turned a very pleasing silver/gray color. Plus they stay put in a stiff breeze.

Terry

Re: outdoor lumber for chairs!!!

#6

Re: outdoor lumber for chairs!!!

Brian Altman

>I hate to say this on this board. But... I saw some great looking chairs made from Trex or some brand of the fake decking boards. It had been outside for 3 years and looked like new.

Brian

Re: outdoor lumber for chairs!!!

#7

Not sure that it matters

Curly Smith

>As long as you seal the wood with a good spar poly and maintain the finish it shouldn't matter what wood you use. Unsealed you might want to use a more weather tolerant wood but, odds are, you'd still get 3-5 years of service.

Besides, once you build the chairs you'll need a gazebo to properly showcase them so they'll be mostly out of the weather anyway.