Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

OT - kinda - gauges of steel

Posts

OT - kinda - gauges of steel

#1

OT - kinda - gauges of steel

Terry Alexander

>Ok...what is the difference in:

14 gauge steel

18 gauge steel

26 gauge steel

What would you use to cut each of these?

As always - thanks in advance!

Terry Alexander - wood scrap maker not a metal worker ;-)

Re: OT - kinda - gauges of steel

#2

Re: OT - kinda - gauges of steel

Pete LaBelle

>14 ga = 0.080"

18 ga = 0.047"

26 ga = 0.018" thick

Cutting equipment depends on whether cuts are straight, curved & how clean you want the cut. 26 ga can be cut with tin snips. Others will have to be cut with a saw, shear, nibbler or torch.

Re: OT - kinda - gauges of steel

#3

Re: OT - Now for the real question

Terry Alexander

>I have a Mueller building that is 26 ga. steel. I bought the Central Pneumatic Pistol Grip Air Shear from Harbor Freight just for this building. I buy HF tools when I need a tool for a one-time use. Anyway, it is advertised that this tool would cut through 14 ga. metal. Well.....we had to work hard hard hard to get it to cut through our 26 ga. steel lengthwise. It wouldn't even budge when we tried to cut across the "ripples" and bends in the metal.

Any suggestions? Technique?

My "assumption" is that if it is advertised to cut through 14 ga. it ought to smoke through 26 ga.

Any and all comments/suggestions would be appreciated.

Terry Alexander

Re: OT - kinda - gauges of steel

#4

Re: OT -And I have an additional ...

Jamie Donaldson

>... question for those in the know- are gauges in metal sheets and gauges in wire the same measuring standard for thickness?

Re: OT - kinda - gauges of steel

#5

Re: OT - Now for the real question

Bill McDonald

>Sounds like a good excuse to get a plasma cutter :)

Re: OT - kinda - gauges of steel

#6

Re: Uh, yes...and no, sort of...

Al Stokka - Cambridge, Iowa

>Jamie,

One has to be specific as to material. For example let's use 14 gage. The decimal thickness for various metals are:

Steel, hot rolled: .0747

Steel, hot rolled pickled and oiled (P&O): .0747

Steel, cold rolled: .0747

Steel, galvanized - G90: .1084

Non-ferrous: .0641

Steel wire: .0800

Copper wire: .0641

It is always best to use decimal thickness rather than gage numbers.

Al

Re: OT - kinda - gauges of steel

#7

Re: OT - Now for the real question -Sawsall

Larry Clinton At Frankfort (Central)., Indiana

>A reciprocating saw will cut that metal easily, a saber saw with the right blade will also work - although not quite as fast. You also might try a metal (abrasive blade) in a circular saw. I have cut many feet with my sawsall and saber saw, have one of the circular blades - just never had an occasion to try it out. Another fairly quick method is using an Acetylene / oxygen cutting torch. This is overkill for 28 gage but will work. As to the Harbor freight shears - sometimes you get what you pay for :~>. I have a Kett electric shear - it will cut 28 gage with ease, but due to the jaw opening, not sure I could cut across the "waves".

Re: OT - kinda - gauges of steel

#8

Re: OT - Now for the real question -Sawsall

Barry Irby

>Tin snips will make short work of the lighter gauges.

And Larry is right. A Sawzall or Saber Saw will do it in a hurry too. Be sure to wear Eye protection. The chips are vicious.