Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Purchasing a used table saw

Posts

Purchasing a used table saw

#1

Purchasing a used table saw

Brett Elliott

>Hello all,

I'm beginning to build my garage workshop. I recently found a local guy selling a Delta 34-444 table saw with a 36-905 unifence. The saw is 12 years old, and the fence is 7.

Never having purchased a used table saw, what sort of defects should I look out for? Is the age something I should be concerned about? Does anyone know where I can find specs for this unit? I've Googled about a bit, but I can't seem to find anything.

He's asking $425 (US) which seems a bit high to me--do you think it's a fair price?

Thanks!

Brett

Re: Purchasing a used table saw

#2

Good saw

Mark Goodall - ATL - tooljunkie

>That's the first saw I had. Except I got it as with the Unifence included, so it was model 34-445 instead of 34-444.

I sold it about 10 years ago. I think I paid $650 for it and sold it for about $500. It's been a while, but I think those numbers are right.

If it's in good shape, then $425 is a decent price.

Happy Woodworking!

Re: Purchasing a used table saw

#3

Re: Purchasing a used table saw

Chuck Lenz

>I have a Delta 34-444. I bought it brand new about 12 years ago with the 30" Unifence and a mobile base. I paid a little over $900 back then for it. It's been a good saw, and I've used it alot without a problem. If you do buy it I recommend a Fenner Drives PowerTwist link belt for it and wire it up for 220 volts if you have the power in your shop to do so. With those two modifications I think you'd really be happy with the saw, I know I am. I also made a sheet metal dust chute for the saw. If you have a dust collector and plan to hook it up to that saw let me know.


img

Re: Purchasing a used table saw

#4

Re: Purchasing a used table saw

Tony - Memphis

>That's the same saw I have. I've had it for 11 years I think. I added a Beis fence several years ago. It's been a good saw. I had one problem with the motor, but Delta replaced it even though it was out of warranty. The switch recently broke ($5 at Lowes). I don't follow prices, so I can't help you there, but I would pay that to replace mine. My top is not perfectly flat, and it has all the issues that most contractor's saws have, but I have never seen any of that as a problem. I've been very happy with it. If it is setup where it is at now, make a few cuts and see how it does.

Tony

Re: Purchasing a used table saw

#5

Re: Purchasing a used table saw 

Chuck Lenz

>


img

Re: Purchasing a used table saw

#6

Re: Purchasing a used table saw

Howard Norman-Prescott, AZ

>That is the table saw that I have. I added a 30" Bies fence to it a few years ago. Good saw with all of the associated problems of any contractors saws. ie, Not designed for dust collection. A broom will come in handy if you buy the saw. I have had mine for 12-15 years I would guess.

Howard

Re: Purchasing a used table saw

#7

Re: Purchasing a used table saw

Pete LaBelle

>Take off the belt and turn both the saw and motor shafts and listen to the bearings. Should run quietly & smoothly. Check how well the up/down & tilt mechanisms work, especially at both extreems of the travel. Bring a straight edge to verify the top is flat. Check condition of the power cord. Is the rip fence parallel with the cross cut grooves in the table (it is adjustable). Beyond any broken/repaired castings or bent metal, not much else to go wrong on a saw.

Re: Purchasing a used table saw

#8

Re: Purchasing a used table saw ( Thanks Howard )

Chuck Lenz

>Howard, dust collection works just fine if you have the correct setup. I really get tired of people not believeing in the setup I have when they have never tried it ! People need to get over this stupid myth that Contractors saws are not capable of efficient dust collection and get their head out of the sawdust pile.

Re: Purchasing a used table saw

#9

Re: Purchasing a used table saw

Brett Elliott

>Thanks for all of the responses! I'm heading out tomorrow to take a look at it. Unofortunately this may result in my car living in the driveway until I build new garage cabinets to consolidate and clean up my mess of a garage.

Take care,

Brett

Re: Purchasing a used table saw

#10

Re: Purchasing a used table saw

Steve Schoene

>If the blade tilts and raises smoothly, there is little that can be wrong. Even the arbor and bearings can be replaced fairl reasonably. I have a Unisaw that I think was made aroung 1945, and wouldn't trade it for a new one. Table saws have a very long life, measured more in decades than in years.

Re: Purchasing a used table saw

#11

Dont forget the want to buy ads...

John Cotten

>I had never thought of this until recently. A buddy of mine ran a WTB ad in the local paper a few weeks ago looking for a saw. Wound up with a Powermatic 66 for $100 in very good condition. A widow had it in her basement (yes it was a bear to get out...) Her husband passed two years ago. It was in the basement collecting dust and spider webs. She was happy to have it go to a good home and get it out of her basement.

Never know until you ask. (Wish I had thought of it first)

JC

Re: Purchasing a used table saw

#12

Cars.......

Mark Goodall - ATL - tooljunkie

>You car will last you at most 7-8 years, your tablesaw should last your 50+ years, the treasures you make with your tablesaw should last 100-150 years.

So putting things into that perspective, you car should be in the driveway ;)

Happy Woodworking!

Re: Purchasing a used table saw

#13

Re: Purchasing a used table saw ( Thanks Howard )

Howard Norman-Prescott, AZ

>Quite frankly I have never tried to do dust collecting on my contractors saw. One of these days, if I live long enough, I will add some dust collecting apparatus to the saw. It is not high on my "to do list".

Howard

Re: Purchasing a used table saw

#14

Re: Purchasing a used table saw ( Thanks Howard )

Chuck Lenz

>It should be one of the first things on your to do list if you care at all about your health. Someday all that fine dust is going to catchup to you. I use to think the same way as you do Howard until a couple of years ago. I've been woodworking for close to 30 years as a hobby and trying to go out on my own. I had absolutely no dust collection or air filtration in the shop. In the winter time when all the doors and windows were shut sometimes the air got so thick with fine dust I was afraid I'd blow the shop up with the wood stove going. Also It started geting to the point that if I spent a day in the shop I was exhausted for 2 to 3 days afterwards with flu like symtoms. Thats when I finally woke up and started geting serious about dust collection and air filtration, and everyone else should too if they haven't allready. Don't make the same mistake I made for many years, wood dust is nothing to ignore.

Re: Purchasing a used table saw

#15

I bought it!

Brett Elliott

>Thanks again for all of the responses. I bought the saw. It was in pretty nice shape, it even had one of those fancy pants link belts already installed (complete with recipt). The owner is going to deliver it some time next week. A friend at work has offered to let me use his shop to make some push sticks. In no time, I'll have new garage cabinets!

Thanks,

Brett