Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Where do I put the rakes? * PICS

Posts

Where do I put the rakes? * PICS

#1

Where do I put the rakes? * PICS

Chet Kloss from Livonia, MI

>

Since I've taken over my entire two car garage for my woodshop


LOML asked me "Where do we put the rakes??"


This plastic job was just temporary...








First a little design...







Meet the build team - My niece is studying Architecture and my nephew wants to learn to build







Though we used a level to check for plumb, furniture people just can't get away from using squares...







Walls up and starting the roof...







2 x 6 for bottoms of the trusses so we can store a lot up there...







Up on the rooooffffff.....







Starting the lumber rack - shown about one quarter full...







And the finished product







While I prefer making furniture to general carpentry,


this was a great project and involved my whole family

,,,,,,,,,,,,Chet


Re: Where do I put the rakes? * PICS

#2

JL

Re:Nice trusses..

JL

>Did you build them? I like the idea of the 2 x 6s.

Re: Where do I put the rakes? * PICS

#3

Re:Nice trusses..

Chet Kloss from Livonia, MI

>Yes. They are 2x4's on the diagonals with a 2x6 across the bottom. The gusset plates are 1/2" plywood and the collar ties are scrap 1x3 stock. I used construction adhesive and screws to attach the gusset plates. All in all, they worked out very well.

,,,,,,,,,,,Chet

Re: Where do I put the rakes? * PICS

#4

Dale Lenz

Re: I like....

Dale Lenz

>the transoms windows, my compliments to the designer! What kind of design detail is that on your exterior window molding, for lack of a better word?

Thanks for sharing

Re: Where do I put the rakes? * PICS

#5

Nicely done!

nailshooter

>I like the design a lot, including the details around the windows.

In my business I have build a lot of these, including a 14 X 20 for myself.

One thing you could do to enhance access to the ceiling/"attic" storage would be to go back a couple of trusses from the front and cut out the ceiling joist on both sides joist about 14 inches from the wall. Reinforce with a large plywood gusset first, or a couple more collar ties and you shouldn't have any problems doing that. With just one ceiling joist gone you can get material in and out of the "attic" much, much easier.

The 14" remains to maintain the integrity of the gussets, and they are great to hang extension cords on.

Robert

Re: Where do I put the rakes? * PICS

#6

A loft is a handy space.

Basil

>I built one in my little out building, left a 4' open space in the front and a short moveable ladder to use for access. I put it there for a place to store all the Christmas decorations, got'em outta the house, worked fine.

....Except for one little detail, give a woman a storage space and she feels the need to fill it up. So now the top of the storage shed is full of old Christmas stuff and the house is full of new Christmas stuff.

Basil

Re: Where do I put the rakes? * PICS

#7

Agreed

Chet Kloss from Livonia, MI

>I agree - I could use better access to the "upper" space. I will likely take your suggestion verbatim and open up the top a bit.

Thanks,

,,,,,,,,,,,Chet

Re: Where do I put the rakes? * PICS

#8

Ellis Walentine

Great job, Chet

Ellis Walentine

>I like the window trim details, too.

Thanks for keeping a log of the project and sharing it here.

Ellis

Re: Where do I put the rakes? * PICS

#9

Foul!!

Ernie Miller

>That is cheating! you cant build a shed for your wives garden tools and then as the first act of storage put a lumber rack in it as a continuatuon of you shop. that just ain't right! I see the mower but no rakes or shovels. You better buy the wife some flowers and give the kids a gift card for some new CD why you are at it for helping. That just isn't right. Looks good I like the design

Re: Where do I put the rakes? * PICS

#10

It's all in how you explain it...

Chet Kloss from Livonia, MI

>You see Ernie, the original plasctic shed was 7 x 7. This one is 10 x 12. So, if I use 2 x 10 for my lumber storage, that still leaves 10 x 10 (or 51 sq ft more) than the plastic shed - plus all the vertical space - so everybody wins...

Are you buying any of this...

,,,,,,,,,,Chet

Re: Where do I put the rakes? * PICS

#11

And there's a video *LINK*

Chet Kloss from Livonia, MI

>Thanks Ellis.

If you've got 6 minutes of your life you're willing to waste, check out the video.

,,,,,,,,,,Chet


Building the shed

Re: Where do I put the rakes? * PICS

#12

Shop Annex not Shed

Matt Robinette,Mt Juliet Tn

>I was thinking the same thing. By placing that wood in the shed it is technicaly now a shop annex. Tell SWMBO what you need to but we all know what it really is;)

Looks great

Matt

Re: Where do I put the rakes? * PICS

#13

Re: It's all in how you explain it...

Ernie Miller

>No but I'm not you wife so it dosent matter. Really great design job. I build a shed about that size a couples ago I was up front it was for wood storage. I haev allowed a few garden items to be stored in it but because of all the wood there is only about 4'X4' of floor space for storage and only 3' of wall space. We are still happy I have an over hanging roof on the back with shover and rake storage on a peg board. it is more accessable to the garden and the wisteria on a trellis a short distance away hides them Can't wait for the blooms I love the smell.