>I'm designing a TV cabinet for a 60" TV that will be outside on a covered terrace and need some help. While the TV will be sheltered from direct rain, it's possible some might blow in so I want to totally enclose the TV. I've considered pocket doors like you see on many entertainment centers, but they sometimes don't fit well and I would be concerned about them fitting well outside.
So, two questions; 1) what type of doors would you suggest and 2) what wood should I use? I thought about teak, but have never used it.
>A 60" wide screen means your doors will each be 30+" wide. Unless your cabinet is also 30"+ deep, it's going to be hard to get the doors out of the way, whether it's inside pockets or around the sides of the cabinet. Maybe one solution would be to make a single large door and hinge it at the top, so it folds back over the top of the cabinet. If the cabinet is shallow, you could make the door with two horizontal panels, hinged in the middle.
Regarding pocket doors, if you make them accurately and use good quality hardware, they should not be a problem. I've had better luck with the old style Accurides than with the newer versions that have European-style hinge cups. They seem to articulate too much, and on a door that is 30" wide, the weight could be an issue. There are much higher-end scissors-type pocket door hardware packages on the market, too, that would virtually guarantee a trouble-free job, but they are very pricey.
Speaking of scissors, why not consider houusing the TV in a low cabinet with a motorized scissors mechanism to raise it out of the base when in use?
Regarding your choice of wood, if you're going to finish this cabinet, you don't really need teak or another "outdoor" wood, but it wouldn't hurt. Regardless, you'll have to re-coat periodically -- usually once a year if exposed to the weather and two or three years if not.
Be sure you take into account the equilibrium moisture content of wood in your region. Unless you're in the Southwest, it will probably average out at about 12-14%. If you start with kiln-dried wood, it would be a good idea to let it acclimate outdoors for a while before you start making parts and pieces.
>My choice would be Bald Cypress or Mahogany. The Cypress will never rot, and is strong enough for the job. It can be painted or stained. Mahogany costs more, but it machines as easily as Cypress and finishes well.
A Tambor roll-up is definitly out of the question. They are finicky enough in a dry situation, and should not be considered.
I think you should plan on a cover of some sort. Your worry is getting the TV to live outside, not the wood. Good luck. Art
>All you have to do to scale up to a tambour that tall is to use stock that is stiff enough. Tambours derive great strength from being glued to a common membrane with many others, so I don't forsee any great problems even if you made the tambours as thin as 1/2". You could err on the high side and make them 3/4" thick if you want. Be sure to use a glue that will stand up to humid conditions -- I'd probably use epoxy or even contact cement.
>I'll pass on the redneck idea....there's a stucco wall behind the unit.
I like the glass idea. The TV is on rollers, so I could roll it in and out from the side when needed. Or just make the glass frame so that it can be detached.
>Since you haven't mentioned the amount of space available, I would consider making a box with a fitted top and make the TV disappear vertically when not in use. While the motorized mechanizisms are expensive (around 1K or more), you can make one for around $150 to $200.
As far as the wood, I would consider lyptus or mahogany. Both will handle the weather but as Ellis mentioned, you will need to up grade the finish occassionally. I would use a good quality marine grade finish as used on a wooden boat.
lyptus. Great stuff to work with. The finish is pre-catalyized lacquer.