Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Drying lumber/Insect questions?

Posts

Drying lumber/Insect questions?

#1

Drying lumber/Insect questions?

Barry Irby

>I cut and stacked some walnut and cherry on stickers in an open shed in central Virginia.

I notice I have some "internal" streaks in the walnut that appear to be some sort of insect that bored in at soem time in the past and made a little cavity nad a stain or streak several inches long. I believe this to be almost "characteristic" of Virginia lowland walnut. Anyone know more aobut this?

I also appear to have another type of bug tht has bored into the sapwood of the walnut and left crooked tubular tunnels. I may have several varieties of this type because the tunnels are different sizes and some are filled with frass and some are not.

So, Is this "normal". Do they stop eating the wood once it dries out? Do I need to treat them with some type of chemical? What would you use? Is thee residue of the chemicla left in the wood?

Re: Drying lumber/Insect questions?

#2

Re: Drying lumber/Insect questions?

Dave Mount

>Morning Barry--

Don't know about your streaks, though insect damage will cause streaks in many tree species.

The sapwood holes sound like powderpost beetles. Very annoying. Some species are unable to persist below 15% MC, others can. There are different species which may account for the different sized holes. Some Googling will get you more info. The damage may not be over; some infestations continue to cycle indefinitely. Heat is needed to kill them, usually through kiln drying, although once I had some green riven chair parts that I treated by boiling them (while still green) in a friends maple syrup evaporator pan. . .

Best,

Dave

Re: Drying lumber/Insect questions?

#3

you are in a heap of trouble

Bill Tindal, E.TN

>I notice I have some "internal" streaks in the walnut Yes, common in "field" walnuts.

I also appear to have another type of bug tht has bored into the sapwood You have powder post beetles and you got a heap of trouble.

Do I need to treat them with some type of chemical? Quickly

Presuming you don't object to chemical warfare........I spray all the wood I store for any length of time with Lindane. I have not had a problem with wood treated this way and some has been stored 20 years. You can kill what is there with any insecticide, eg malathion, but it will not as persistent as Lindane. Make up spray and wet the boards with the solution. On the other hand these are hit and run critters. They may have bored and gone already.

Re: Drying lumber/Insect questions?

#4

Re: you are in a heap of trouble

Kneale Brownson in Northern MI

>I thought Lindane had been banned. Where do you get it?

Re: Drying lumber/Insect questions?

#5

Dale Lenz

Re: Mexico, : ' >

Dale Lenz

>If you can find Lindane, it's legal to purchase. We, the USA, just can't make any more of it.

Re: Drying lumber/Insect questions?

#6

Re: Tim-bor

Al Stokka - Cambridge, Iowa

>An effective wood treatment is Tim-bor.

Al

Re: Drying lumber/Insect questions?

#7

Re: Tim-bor

Keith Newton

>I think I have read Dr. Wengert address this as only effective for preventing new insects from entering the wood, but not killing the ones that are already in there.

The most common way is to use heat. I believe the magic number is 140�. If you only have a small amount to treat, and don't have a kiln, I have heard others suggest laying them out in the sun covered in black plastic in the Summer Sun. Of course you need to make sure that they are pretty dry by the time you do that, and even then you might want to cover them with some cloth or something to slow the evaporation as the cool down to avoid surface checking.

Black streaks running up and down the grain from a hole indicates that the tree was still alive when it entered. Lots of specks with streaks are from Yellow-belly Sapsuckers. Some people seem to be bothered by these, but I rather like seeing them.

Re: Drying lumber/Insect questions?

#8

Re: Labeled to kill

Al Stokka - Cambridge, Iowa

>Don't know from personal experience but, the product label says:

TIM-BOR Professional is also effective for the prevention and control of wood destroying insects such as, but not limited to, the following organisms:

Subterranean Termites (Reticulitermes, Heterotemes, Coptotermes (Formosan)),

Drywood Termites (Kalotermes, Incisitermes),

Dampwood Termites (Zootermopis),

Powderpost Beetles (Lyctidae),

"False" Powderpost Beetles (Bostrichidae),

Deathwatch and Furniture Beetles (Anobiidae),

Old House Borers, Longhorn Beetles (Cerambycidae),

Carpenter Ant (Camponotus),

Bark and Timber Beetles (Scolytidae).

Al

Re: Drying lumber/Insect questions?

#9

Re: Drying lumber/Insect questions?

Barry Irby

>The references to TimBor are interesting. The same company makes BoraCare which has the same active chemical (borate) and I actually have some. I commonly reccomend it to people on my home inspections. I guess this is a DUHH! moment for me. I actually have the chemical I need sitting in my shop. (I like the Boracare version better as it is a liquid and penetrates better.)

I am wondering about this though. Would either chemical have any long term effect on the lumber in terms of affecting the finish. The Boracare is in a glycol vehicle that helps it penetrate. The Timbor is mixed in water and tends to leave a minor amount of powder on the surface. Would either one interfere with finishing the piece of furnature?

Wonder what it takes to apply it to a stack of wood on stickers?

Re: Drying lumber/Insect questions?

#10

Re: Question for Micheal Dresdner or..

Al Stokka - Cambridge, Iowa

>Barry,

I did intend to mention the possibilty of finishing problems in my post about Tim-bor. Sorry. Also, wonder about abrasiveness to cutting tools?

But, in my defense, you didn't mention anything about actually using the wood in your original post. Do you make stuff from the wood you have cut and stacked? I have mulberry, oak, and walnut (among others) stacked in my barn loft. Hmmmm, do you think I should make something out of it? Something to consider, I guess. ;^)

Al

Al

Re: Drying lumber/Insect questions?

#11

Questions about this stuff

Bill Tindal, E.TN

>Does anyone know for sure that it will work on lumber that has these critters boring away inside? Unlike something like malathion this stuff is not volatile (I think, isn't it borax as active ingredient?). Hence, it either must get to the bug buried in the wood or the bug to it.

My success in using traditional insecticides is not theoretical. I have battled these things for years and won every time. If you have them active in the wood and spray to wet the surface with malathion ( or lindane) for long term storage, they are killed. I would suppose that if you wrapped a stickered stack with plastic and threw in a can of moth balls that would work too.

Re: Drying lumber/Insect questions?

#12

Re: Questions about this stuff....answer

SanMan

>Bill....Ive used Timbor recently and am unsure of its completeness.

I dont think its penetrates very far into the wood, but acts as a protective layer on the very top, maybe < 1/16" down into the wood?

I mixed up a batch and sprayed it on using a garden sprayer. It dries like a saline solution with a white chrystalline layer thats obvious. Upon exit it appeared the lil buggers already inside the wood died trying to get out. I cannot be sure it killed all of them so I have not used the wood. The wood was red oak acquired at an auction on a whim. I wont be doing this again as its not worth the risk of infecting the rest of my "stash".

To be sure everything inside this wood is dead, Im thinking the wood wrapped in black plastic out in full sun for a day or two will do it. Its supposed to be in the 90's here soon, perfect time to try it out.

SM

Re: Drying lumber/Insect questions?

#13

>>>>>the magic number is 130�

SanMan

>

Re: Drying lumber/Insect questions?

#14

Dale Lenz

Re: Questions about this stuff

Dale Lenz

>Not sure, you should google to find out the ABC of this: but I believe it makes a difference if you use TimBor or BoraCare. My memory thinks TimBor is for green wood and BoraCare is for dried wood. I'd think if you knew what you where doing you could make either work: but then you would be breaking federal law, as not following the label directions.

The problem with Lindane, which I use on my green wood also, is as you know: Lindane is a surface treatment, does not get into the wood fibers, maybe a few thousands of an inch. So base on that information, don't see how it can affect any bug inside the wood. Now once the critters exit to mate, that another story. Also, as you know, the life cycle of the PPB can be a few months to several years, depending on how much starch, food supply is available to the critters.

I have second guessed infected wood, purchased dried from others places than my own lumber. Only to witness frass piles near my new creations. My thoughts: if I see what I believe is PPB evidences, that board is tossed in my firewood supply. This has only happened once(15-20 yrs.) since I started treating my freshly sawn green lumber with Lindane.

Re: Drying lumber/Insect questions?

#15

Re: Questions about this stuff

Al Stokka - Cambridge, Iowa

>Bill,

I purposely omitted my source for recommending Tim-bor because I can't remember which of two people made the recommendation. It was either, crap! I forgot his name, that nice fella in the NE U.S. whose shop flooded and was helped by a number of Badger Ponders to get his shop back in order. He also spent innumerable hours refurbishing his shop equipment. Or, it was KC Constable, the guy that loves to hate routers. Just remembered...the NE guy is Dominic Greco. How could I forget?

Perhaps you should read the three documents (MSDS, label, and data sheet) regarding Tim-bor at www.nisuscorp.com. I'd rather you get the information firsthand rahthr than through my (sometimes faulty) filter.

Re: Drying lumber/Insect questions?

#16

Re: Question for Micheal Dresdner or..

Barry Irby

>Al, What a novel Idea! Harvest wood, dry it and then make something out of it! Wish I had thought of that.

Actually, I did. I havested some walnut and dried it and made a bed and night stand for my son and a table for my cousin's daughter as a wedding present.

Re: Drying lumber/Insect questions?

#17

What I thought about Timbor and BoraCare

Barry Irby

>I stumbled into what knowledge I have of these chemicals. IIRC, Permachink used to make or market BoraCare. Permachink markets an acrylic chinking for log homes. A problem with log homes is that the logs tend to rot over time. Along comes BoraCare. With a glycol base, the glycol was supposed to act as a vehicle and a penetrant and carry the borate deep into the wood. I was told it was able to reach the center of a twelve inch square beam.

Not sure where Nisus came into the picture, but after a while they had Boracare and Permachink was "out". Timbor was their principle competition. Then Nisus acquired Timbor and sell both.

Now I am lead to believe that BoraCare can be used in a single application and will deliver enough chemical to be effective against rot and several insects. Timbor requires two applications to reach the same strength. Both must be used indoors or out of the weather and both are water soluble.

Based on nothing more than unfounded prejudice, I like BoraCare better. Timbor comes as a powder and seems to sit on the surface. BoraCare seems to soak in. When I see rotting joists that have been sprayed with Timbor, I see a white glittery salt like residue. When they spray with Boracare, I have trouble seeing any residue. I am assuming it soaked in. Could be they cheated and just sprayed with water.

So, I believe BoraCare penetrates better, but what effect does the glycol have?

Re: Drying lumber/Insect questions?

#18

It has some voatility

Bill Tindal, E.TN

>The vapors get them

Re: Drying lumber/Insect questions?

#19

Dale Lenz

Re: It has some volatility

Dale Lenz

>Bill,

When Lindane was recommended for bark beetle control the advice was to reapply every so often during the "bug season" and after a hard rain, due to the rain washing the Lindane off. I could not find any information on Lindane works due to it's gas phase. Could you supply information on this.

Thanks,

Dale

Re: Drying lumber/Insect questions?

#20

Re: What I thought about Timbor and BoraCare

John in New Mexico

>Barry,

I believe the glycol helps penetration, as well as being a fungicide. You can make your own, using roach powder and antifreeze - preferably the pet safe kind (propylene glycol rather than ethylene glycol). Both boric acid and glycols are aparently hygroscopic enough to penetrate just using the eq. MC of the wood.

John

Re: Drying lumber/Insect questions?

#21

I only have my experience to go by.

Bill Tindal, E.TN

>I have had attacks, especially in ash. I spray to wet the surface, dead pack and my troubles are over, forever. I have no observation as to how the poison get to the bugs in their holes, but vapor seemed to me to be the most probable. It has a significant vapor pressure, especially the most active isomer.

Re: Drying lumber/Insect questions?

#22

Dale Lenz

Re: Interesting...

Dale Lenz

>I like the idea of dead stacking the lumber after treating "dry" lumber, the increase MC would be very little. I have often wondered if the bugs are finished in the first place, PPB holes are exit holes. I've heard of folks doing "X" claiming that works for PPB control. If I ever need to try your dead stack method, I will. Might add some heat to speed things up a little.

Thanks for the reply