Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

My piece for the Furniture Society show *LINK*

Posts

My piece for the Furniture Society show *LINK*

#1

My piece for the Furniture Society show *LINK*

HC Sakman

>Hi All,

This is the latest piece that I made for the Furniture Society/Cascadia show.

It is a modified version of my wine cabinets. The main reason I converted wine cabinet into a credenza was "time". This piece was completed in 12 (yes TWELVE) days. As you would imagine, I had no time for 5 extra drawers within that 12 days. (Including the 1st day, sorting out the lumber to be used!!!) I had help though, thanks to Harvey Brooks. He is -as some of you already know- a turner and he complained at every single opportunity that "He rather be at his lathe right now!" ;-) Even Charles Smith showed up the last day and thankfully sanded/polished 4 ebony handles in 6 hours. You have to touch and caress those handles to appreciate.




















This cabinet built entirely with solid stock, except the quilted/heavily curled drawer fronts, which are veneered. The center piece in the top is 16" wide, and that's after I cut down to that size from 18". The spalting matches the curly spalted maple on the sides.

Burl panels are solid and received 7 coats of hand rubbed varnish.

Compound curved ends of the top was easier than I anticipated, though nevertheless were challenging somewhat. Bubinga ends were over 2" thick in order to get that double curved edge.

All of the bubinga is quartered. All of the door frame members are from 2 blocks of very heavily curled maple.

The detail is in front of the shelf is 1/8 beaded bubinga inlay in Eastern maple shelf.

There are many details in here, you just have to look carefully.

Chico...


Other versions of this cabinet can be seen here.

Re: My piece for the Furniture Society show *LINK*

#2

Absolutely stunning, Chico

Hank Knight from SC

>

Re: My piece for the Furniture Society show *LINK*

#3

wow - Amazing piece

Randy G

>I'm not sure what else I could say. Very very nice looking piece you did a fantastic job on it including wood selection. Wonderful

Randy

Re: My piece for the Furniture Society show *LINK*

#4

Awesome, Chico!

Denis Ch�nard, Orl�ans, Ont.

>

Re: My piece for the Furniture Society show *LINK*

#5

Re: My piece for the Furniture Society show

Charles Self

>Stunned is the word. I sat here with my mouth gaping open...that is a beauty, and the style is something I also like. Usually, I love the work, don't care for the style. This one does it all.

Re: My piece for the Furniture Society show *LINK*

#6

Blessed Are The Piece Makers

George@Colonel's Workshop-Havertown PA

>Good Afternoon Chico,

You keep us all in continuous awe. I love the detail and the choices of wood. By comparison I am still back in high school making model airplanes from balsa, japanese tissue and dope. I truely admire your work.

George

Re: My piece for the Furniture Society show *LINK*

#7

Wonderfil, simply wonderful!!

Jim Dillon

>Chico,

I really like the way the coloring of the "rays" in the curly maple go so well with the color of the bubinga. And all the other details are just exquisite. A piece of craft you can be really proud of. Thanks for taking the time to post the pics.

Jim

Re: My piece for the Furniture Society show *LINK*

#8

Re: My piece for the Furniture Society show

Nick Tuzzolino

>Wow!!! Breathtaking!

Re: My piece for the Furniture Society show *LINK*

#9

I object ! ! ! !

Harvey Brooks, Victoria, BC

>I didn't complain while I was being fed. I too think that it is an amazing piece but then I may be slightly biased. We'll do the next one in ten days - okay? Harvey

Re: My piece for the Furniture Society show *LINK*

#10

Sweet, sweet, sweet!

Alan Tolchinsky

>Love that piece for most of the reasons everybody else has stated.

Re: My piece for the Furniture Society show *LINK*

#11

Next time...

Charles R. Smith from Victoria

>Chico,

Helping you work on this project was fun. But the next time you do something like this, invite me sooner. The food at your place is so good that, in future, I'd like to get involved before the last day. :)

Charles in Victoria (who is still coveting Chico's wood pile of bubinga, ebony...)

Re: My piece for the Furniture Society show *LINK*

#12

Chico, congrats, I could not accomplish this

Fred West in West Chester, PA

>beautiful piece in 12 years much less 12 days. :0)Fred

Re: My piece for the Furniture Society show *LINK*

#13

Exquisite!

Joanne Adler in Pt. Pleasant, PA

>This piece just sings! And a lovely melody it is. The woods and grain are gorgeous. The design flows with ease. And I love the little animal faces in the front burl panels. :-)

Thanks for sharing, Chico. You are always so inspiring.

Re: My piece for the Furniture Society show *LINK*

#14

JL

Re:Absolutely stunning.. (Better not show this to.

JL

>the LOML). The "honey do" list is already too long...

Re: My piece for the Furniture Society show *LINK*

#15

Barb Siddiqui

Really gorgeous, Chico

Barb Siddiqui

>you set the bar so-o-o-o high!

-Barb

Re: My piece for the Furniture Society show *LINK*

#16

looks good, Chico. A question if I may

Andrew F in Australia

>Hi Chico,

Looks good - classic 1920's proportions.

My question related to the door design. Assuming that the door rails are not veneered, is there a reason for running the rails along the door in the way that you have? Convention is to run the door stiles top-to-bottom of the opening, at a guess to avoid racking, but I'm not sure (just know that it's the 'way it's always done')

Door rails are normally cut to fit between the stiles.

Just curious as to the reasoning.

Cheers,

Andrew

Re: My piece for the Furniture Society show *LINK*

#17

Beautiful

Stephen Kirk in Quakertown, PA

>That is a gorgeous piece. The contrasting grain (and grain direction) just really sets it off.

Re: My piece for the Furniture Society show *LINK*

#18

Alan Young

Excellent work Chico. Good Luck at the Show!

Alan Young

>

Re: My piece for the Furniture Society show *LINK*

#19

Re: looks good, Chico. A question if I may

HC Sakman

>Hi Andrew,

The answer to your question is simple. The hinge design dictates the grain to run this way. There are 1/2"x1/2" oil impragnated bronze bushings in the frame of the cabinet, as well as the doors, housing 1/4" polished steel pins. Although there are no screws, I just don't feel comfortable drilling a 1/2" deep 1/2" in diameter hole only 5/32"~3/16" away from the edge into the vulnerable end grain of vertical stiles. The end grain of stiles may check or when door is forced open more than it should, the bushing may split the end grain much easier than edge grain of the upper and lower rails.

That is the reason.

Thanks,

Chico...

Re: My piece for the Furniture Society show *LINK*

#20

Re: My piece for the Furniture Society show

Garrett in Victoria BC

>Now I know why "the gate" is not yet done!

Cheers, Garrett

Re: My piece for the Furniture Society show *LINK*

#21

Thanks Chico

Andrew F in Australia

>

Re: My piece for the Furniture Society show *LINK*

#22

gob smacked

Ian (in Sydney, Australia)

>how else can I convey my admiration

Re: My piece for the Furniture Society show *LINK*

#23

Re: My piece for the Furniture Society show

Bob McGovern

>Splendid work as always, Chico. It's fun to have watched your growth as a woodworker these past ten years or so. Really world-class stuff.

Re: My piece for the Furniture Society show *LINK*

#24

there are not enuff adjectives to describe this

Mark Valsi

>Chico,

Once again you have relegated us mere mortals to tertiary status when it comes to woodworking !!

That is one of the most beautiful pieces I have ever seen !!

Damn it, man, you are GREAT !!

Re: My piece for the Furniture Society show *LINK*

#25

Thank You Everybody!

HC Sakman

>I was with a busted keyboard for a week! It felt like a virtual ductape on a mouth! ;-)

Thank you ALL for your input and kind compliments.

Chico...