A wedding present for a friend.
Mac in Indy
>A daughter of a friend of mine asked me to make a box for her wedding gift to her husband. I had made a similar box for her dad last year. This time I decided to put a small plinth around the bottom to form the feet and hide the endgrain of the bottom piece(The bottom and top are glued directly onto the sides. The top's endgrain is hidden by rounding the four edges of the top). This is a variation of a box I made in a Frank Klausz Hand Dovetailing class a few years ago at American Sycamore Woodworkers Retreat. The box is about 7" x 10" x 4".

The Tray is a nice little addition to the box as well.

Here is a shot of the dovetail corner and foot. Yes it's hand cut, Frank would frown if I cut them with a jig!

I used Brusso 95 degree hinges that stop the lid without a chain stop.

Finally I morticed in a half mortice lock.

I think she is going to have me mount a brass plate with their wedding date on the inside of the lid.
Thanks for looking.
Mac



