Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

OT--More on fixing the wife's hard drive

Posts

OT--More on fixing the wife's hard drive

#1

OT--More on fixing the wife's hard drive

Gary Evans Tallassee, TN

>As it turns out, following Bill and Jerry's advice on using xcopy is not as easy as it seems. When I boot my wife's computer using the hard drive that has 98 on it, it keeps asking for the '98 CD so that it can load the various drivers that her computer needs that the other computer didn't. Too bad I don't have a 98 CD. Is there a way to bypass this process and go directly to a command prompt? I can start in safe mode.

I'm wondering if I would be better off to xcopy my hard disc, which is 14G, onto the new 80G drive and then putting that in her computer. I still don't know if I will be able to access her old drive to extract some of her stuff. Anybody know a service that can crack a broken hard drive if this one is inaccessible?

Gary

Re: OT--More on fixing the wife's hard drive

#2

Re: OT--More on fixing the wife's hard drive

Chuck W

>If you had another computer you could slave this drive to retrieve the data. Companies that specialize in retrieving data are expensive.

Re: OT--More on fixing the wife's hard drive

#3

Re: OT--More on fixing the wife's hard drive

Ron in Drums PA

>If you made a complete copy of copy of your old HD, you may have all the drivers on the new HD.

I forget how Win98 is laid out, so here is a guess that might help you find the folder they are hiding in. C:\WINDOWS\system32\drivers

Re: OT--More on fixing the wife's hard drive

#4

Re: OT--More on fixing the wife's hard drive

Curly Smith

>Three items:

1) booting to DOS. The following is from:

How to get to a MS-DOS prompt
because I'm too lazy to type it...

Windows 95, 98, and ME users

If you are able to get into Windows 95, 98 or ME, you can get to a MS-DOS prompt by following the below steps.

Click Start

Click Run

Type "command" and press enter.

This will open a MS-DOS shell. However, if you are attempting to troubleshoot an issue with the computer and are using Microsoft Windows 95 or Windows 98we suggest you restart the computer into MS-DOS. To do this follow the below steps.

Click Start

Click Shutdown

Choose the option to restart the computer into a MS-DOS prompt.

If you are unable to get into Windows 95 or Windows 98 to get into a MS-DOS prompt, follow the below instructions (Windows ME does not have this option).

Reboot the computer

As the computer is booting, press the F8 key when you hear a beep or when you see "Starting Windows 95" or "Starting Windows 98". Windows 98 users sometimes may find it easier to press and hold the left CTRL key as the computer is booting.

If done properly the user should get to a screen similar to the below screen. 4. Select the option for Safe mode command prompt only.

2) You can download a Win98 bootdisk here: Free Boot Disks IDE CDrom Drivers Included

3) Lastly, if there's a computer surplus store in the area then you can buy a Win98 disk for $5. Heck, they might even just give it to you.