Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Hanging Inset Door, How and what Hinges?

Posts

Hanging Inset Door, How and what Hinges?

#1

Hanging Inset Door, How and what Hinges?

Alan Tolchinsky

>How much clearance around the door do you allow for an inset door? This door is going to be 3/4 plywood. Besides plain leaf hinges what other hinges are good for this? It would be nice to use something easier than leaf hinges. I'm looking for strong and easy. Thanks.

__________________

Re: Hanging Inset Door, How and what Hinges?

#2

Alan Young

No Mortise Hinges

Alan Young

>Alan---Hey good name!

No Mortise Hinges are a place to start.


They are widely available from all the regular suppliers....

Alan

Re: Hanging Inset Door, How and what Hinges?

#3

Re: Clearance

Al Stokka - Cambridge, Iowa

>Alan,

The clearance will depend, somewhat, on the size and thickness of the door. 1/16" all around looks good, but with a thick and narrow door you may find that the door grazes the opening as the door is swung.

Al

Re: Hanging Inset Door, How and what Hinges?

#4

Thanks Alan and Al, both good names. :)

Alan Tolchinsky

>

Re: Hanging Inset Door, How and what Hinges?

#5

Re: No Mortise Hinges

Dave Bair, Eaton Rapids, MI

>Amerock makes a "full wrap" no-mortise hinge for inset doors using a face frame that I highly recommend. They go around the door and frame stiles and are very strong and easy to install. They also make a partial wrap for frameless applications that I have also used equally well. I did get a batch that I had to file the hinge face that contacts the wood to remove stamping extrusions in order to get a smaller door-frame gap.