Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

large dowel nuts

Posts

large dowel nuts

#1

large dowel nuts

Patrick Capobianco

>I'm looking for large dowel nuts for for my 6" x 1/2" bolts to attach aprons to legs for workbench. Does anyone know of a source?

Re: large dowel nuts

#2

Re: large dowel nuts

Barry Irby

>I will be interested in this answer also.

I made some recently for a bed I made for my son. Mine were 3/8 bolts and I used a 3/4 steel rod from the borg and drilled and threaded the holes myself. I cut them two inches long. Worked great, made a very solid joint.

I would think you would need the dowel to be about 1". If you drill a 1/2" hole through a 3/4 dowel there woudl not be much strength left. 7/8 might work. Could you use 3/8 or 1/2" by about 1" flat stock and mortice the holes?