Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Small 32mm line boring machines

Posts

Small 32mm line boring machines

#1

Small 32mm line boring machines

Bob McGovern

>Okay, scratch the PM bandsaw. Dude's not going to respond to a basic 1ph/3ph question, he can win his own darn auction. See if I care.

The next hunk of equipment I *really* need is a 13-spindle line boring machine. I spend better than a full day drilling shelf pin holes for each kitchen, using a hand drill & template. There's plenty chance for error or slips, and it's hard on the drill bit & the elbows.

So: Toola, or Conquest? (Delta doesn't interest me.) Anyone had experience with either? Conquest has been at it longer, but the manual Toola machine seems heavier and better-designed. Advice?

Re: Small 32mm line boring machines

#2

Hey Wyoming Bob how ya been?!

David Sophusson, Custer Wa

>Nice to see you got your electrons flowing and your back on line. Went by your place about 3 years ago but the shop looked deserted and there was no one home. We should be going back your way this fall or next spring. Since you�re the expert on concrete counter tops I need to pick your brain for a project I�ve got coming up. Can you still get granite flakes back there?

Sorry can�t help on the boring machine I remember TC had a real nice one but for the life of me I can�t remember the brand.

Good to see ya back!

Sophie

Re: Small 32mm line boring machines

#3

Re: Small 32mm line boring machines

JackLane

>Bob

Another cabinet maker here who's lusting in his heart for a line boring machine. That needs to be one of my next larger purchases. Also need an edgbander and a framing table for face frames. A 42" widebelt would be nice too. I guess that list could go on for a while as I think about it :-).

The Conquest is a nice looking machine. If I'm not mistaken, it has steel gears also. Ritter makes a small machine like that too. I'm inclining toward that one.

I've been watching ebay and the woodweb.com equipment listings for a good used machine. I'd really like to get a 46 spindle double row if I can find one at the right price.

I built a template for my upper cabinet case sides and use a big PC plunge router and collar with a 1/4" straight bit to cut the shelf holes. It works much better than the template and the drill IMO. I still use a drill for my base cabinet and pantry sides. You're right...SLOW. All the best

Jack