Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Dust in my cyclone filter help.

Posts

Dust in my cyclone filter help.

#1

Dust in my cyclone filter help.

jeff

>Hi all

I dismanteled my cyclone yesterday for moving it.

I pipe my cyclone exhaust into big canister filter.

Inside the filter was alot of debris (chips from the planer maybe).

I cleaned it out.

Seemed more like the debris was definilty chips and such, and not alot of fine dust.

What causes this? and any suggestions to fix it?

Jeff

Re: Dust in my cyclone filter help.

#2

Re: Dust in my cyclone filter help.

Paul Woolson

>Did you ever over fill your chip canister? I did that once and since the debris has no place to drop it just takes the next closest road: the filter.

Re: Dust in my cyclone filter help.

#3

Re: Dust in my cyclone filter help.

Phil Thien

>Either what Paul says or a leak between the drop bit and the cyclone. This allows air to get sucked in from the wrong direction, which can carry debris into the filter.

Re: Dust in my cyclone filter help.

#4

I think I might be guilty on both.

jeff

>Thank you.

One of the reasons I just moved the cyclone was to get easier access to empty it. It does get kinda full.

Also, I found a bad gasket seal in the top of the garbage pail I use to collect the debris.

I will fix both.

Jeff