Hey Mark Goodall, about those CMS settings....
John in New Mexico
>I think your diagram has the tilt wrong, should be 35 degrees or so, at least according to the preset on my saw-- seems to work. The 31.6 on the miter works great though.
John
Knowledge You Can Build On — Est. 1998
Hey Mark Goodall, about those CMS settings....
John in New Mexico
>I think your diagram has the tilt wrong, should be 35 degrees or so, at least according to the preset on my saw-- seems to work. The 31.6 on the miter works great though.
John
Hmmm.... okay.
Mark Goodall - ATL - tooljunkie
>I'll have to go down to the shop and check it out. It's possible I mistyped it in the diagram. I have a Sharpie mark on the saw, so I'll check it out and report back.
Happy Woodworking!