Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Tensioning a Bandsaw/Guitar tuner?

Posts

Tensioning a Bandsaw/Guitar tuner?

#1

Tensioning a Bandsaw/Guitar tuner?

Barry Irby

>My son found an old electronic guitar tuner (a KORG I think). Put in new batteries and it appears to work, but I have no real clue.

How do I use it to tension a Delta 14 bandsaw with a riser block? What note am I looking for? Do I back the guides off? I have a 3/8 3tpi blade on there. Without backing off the guides all I hear is a "thunk". The tuner does not appear to respond to the thunk. I thinked a while and thunk I did not know what I was doing so I thought I would ask here.

Re: Tensioning a Bandsaw/Guitar tuner?

#2

Tune it to the key of B ;)

Mark Goodall - ATL - tooljunkie

>

Re: Tensioning a Bandsaw/Guitar tuner?

#3

Ellis Walentine

I would love to know the answer to this.

Ellis Walentine

>

Re: Tensioning a Bandsaw/Guitar tuner?

#4

Re: Tensioning a Bandsaw - note depends on band *LINK*

Garrett in Victoria BC

>Tune to E for a 1/2" band according to van Gogh, and to middle C for a 1" band according to the Handymans Club of America. And yes, the band must be clear of the guides in oder to vibrate when you pluck it.

One of the better articles on bandsaw tensioning is below. BTW, the free DIY FWW gauge to which it refers now requires 'membership'. It's at http://www.taunton.com/finewoodworking/Workshop/WorkshopPDF.aspx?id=2702. I have a copy of the article, and made the jig - it's quite simple - but never use it, because the instructions are imprecise.

Cheers, Garrett


Bandsaw Tuning Guide

Re: Tensioning a Bandsaw/Guitar tuner?

#5

Re: I think you meant B flat! ;-)))

Jamie Donaldson

>

Re: Tensioning a Bandsaw/Guitar tuner?

#6

No, that would make it percussion....

Mark Goodall - ATL - tooljunkie

>Thump, thump, thump, thump.....

;)

Happy Woodworking!