Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Knockdown hardware ID needed

Posts

Knockdown hardware ID needed

#1

Knockdown hardware ID needed

Ken Grunke from SW WI

>I'm bidding on a small job making display cases for a local Ma & Pa food production business, and the sample unit they have and desire to be used is held together by a cam-lock doo-dad which fits in a 25 mm hole.

Can someone point me in the direction for ordering these, or at least tell me what they are called?

Re: Knockdown hardware ID needed

#2

Of course I forgot the picture... 

Ken Grunke from SW WI

>


img

Re: Knockdown hardware ID needed

#3

Re: Knockdown hardware ID needed

Russ Babbitt Jr.

>http://www.rockler.com/product.cfm?page=348

Re: Knockdown hardware ID needed

#4

Re: Knockdown hardware  *LINK*

Mark Mandell - Gone Round In Jersey

>


KD

Re: Knockdown hardware ID needed

#5

Re: Knockdown hardware ID needed *LINK*

Tom Stockton

>Try Hafale they have the best selection of knockdown hardware anywhere.


http://www.hafale.com

Re: Knockdown hardware ID needed

#6

Tom's got it

Ed Mulligan, Cape Cod

>In my neighborhood (eastern Massachusetts) there are hardware distributors to the cabinetmaking trade who stock Hafale and other commercial hardware manufacturers. No doubt there is a similar distributor in your area. They will be able supply a paper catalog (much easier to browse than a web site!) and to supply you with the counts you need.

Ed

Re: Knockdown hardware ID needed

#7

thanks guys, but...

Ken Grunke from SW WI

>I'm still looking--it's not a blind pin I need that screws into one part, but one with a head on it to slip into a through-hole.

I'll ask around locally on the Hafale brand, their website doesn't seem to have a product listing. Thanks for the replies!

Re: Knockdown hardware ID needed

#8

Better link  *LINK*

Ed Mulligan, Cape Cod

>


Hafele

Re: Knockdown hardware ID needed

#9

Re: thanks guys, but...

Tom Stockton

>If I remember correctly you need to register to get to there catalog but it is all online.

Re: Knockdown hardware ID needed

#11

Ellis Walentine

Don't forget, it's spelled Hafele

Ellis Walentine

>