Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

huge fiddleback cherry

Posts

huge fiddleback cherry

#1

huge fiddleback cherry

Bill Tindal, E.TN

>I went to the log yard today to get some firewood. They trim logs to improve grade and the trimmings are free to haul off. They had cut a huge crotch from a cherry log. I got the log grabber operator to turn it on end and with considerable effort I sawed it into 6" planks. I will need to find something to make from it. Any suggestions. I have never been blessed with something like this before.

PS the log yard was busy today and I got some good action photos of unloading log trucks and grading logs which I will post later in the week.

Re: huge fiddleback cherry

#2

Jim in Burlington Ont.

Missed the pic

Jim in Burlington On

>Hi Bill you missed posting the pic.

Re: huge fiddleback cherry

#3

well darn 

Bill Tindal, E.TN

>


img

Re: huge fiddleback cherry

#4

Jim in Burlington Ont.

Sweet

Jim in Burlington On

>That's going to make a few really spectacular doors for cabinet's. Resaw you've got a real treasure.

Re: huge fiddleback cherry

#5

Not from Denver area...

Brian in Brighton

>Unlike that yardstick. I bought a few things from them before they told me that to fix my drain in the basement I would be jackhammering because what I wanted to do was impossible.

BTW: Nice wood!

Brian in Brighton

Re: huge fiddleback cherry

#6

Fiddleback Cherry

Philip Duffy

>Well, I have one that looks like it and I wish mine were 6in thick! Yours will turn into one spectacular bowl, I would think. Mine gets to be a platter/shallow dish because there just is not enough depth to work with on a really good bowl. Best thing about mine is it is sold before it is turned! Phil

Re: huge fiddleback cherry

#7

Don't count your chickens yet!

Thomas Skaggs, Foothills of Mount Level

>Bill,

That is some beautiful wood. But be advised that you need to dry it carefully. Some crotches like that can form nasty cracks. Baby them until dry and by then you'll have some good ideas for their use.

Good luck!

Tom

Re: huge fiddleback cherry

#8

I'm well aware of the perils

Bill Tindal, E.TN

>Any suggestions? I was going to cover the whole thing with Anchor-Seal and put to rest in the proverbial cool dry place.

Re: huge fiddleback cherry

#9

Re: I'm well aware of the perils

Thomas Skaggs, Foothills of Mount Level

>That's probably the best you can do. I know of no real secrets, only that crotch wood doesn't like to dry quickly. I have a friend who makes chairs and likes using crotch wood for the seats. He bemoans the heartbreak of his seat blanks cracking. If the cracks are small then there is always epoxy filler. The beauty of that wood overshadows inperfections in my opinion. Be patient and you might end up with intact beauties there!

Tom

Re: huge fiddleback cherry

#10

Re: Suggestions

Mark Mandell - Gone Round In Jersey

>Instead of Anchorseal all over (I use it too), I would apply smoking hot parafin to the endgrain + 1" only, then sticker the flitch at 1/4" gap, apply big-time weight (a full layer of 4" solid block) to the top of the stack to control the Cherry-dance, and forget it for a few years.

mm

Re: huge fiddleback cherry

#11

about wax

Robin Corell in Atascadero, CA

>On the very first tree I ever milled I painted the ends with Brown Victory which is a micro crystalline wax used for sculpting. it is more flexible and stickier than parafin. It was something I had on hand and I figured it would work better than paint or the wax emulsion sealers since it was thicker and impervious to moisture.

What I failed to understand is that wood shrinks as it dries and the wax, while being flexible when warm, was still not able to shrink along with the wood. the end result was that it ended up shrinking off in large flakes.

That was the last time I have used wax. I have used BLO, scrap latex paint, old yellow glue, and acrylic glue. Of all of these I think the best is acrylic glue. The stuff I had was called Roo Glue and is awsome for glueing melamine. I had half a bottle that was vey old and too thick to use for anything that was sold to a customer so I used it up the way I use up all my old glue. If this stuff wasn't so expensive I would use it to end seal all my wood.

The reality is that I actually don't end seal most of the stuff. But what I do seal is stuff like what Bill has, and then I seal the knots, crotch, and burl areas as well as the end grain.

The other thing I would consider is rather than stickering and stacking these is to stand them on end as near verticle as possible with some spacers under the ends to keep them off the ground. I recently read that the Nakashima Co does this and have tried it on a few stray pices with good results for the free moisture stage of drying, still waiting for EM on these slabs.

Robin Corell

Re: huge fiddleback cherry

#12

thanks for the good ideas

Bill Tindal, E.TN

>