Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

splicing underground phone cable?

Posts

splicing underground phone cable?

#1

splicing underground phone cable?

ernie miller

>Any one know how to splice an underground phone cable? I an building a sun room ( See Hand tool board) and I had to move my underground phone cable to get it to where I want it to run into the house it needs to be about 6' longer is there any wat to make an underground splice? $800 to have Mabell put in a new one Gotta be a better way.

Re: splicing underground phone cable?

#2

Re: splicing underground phone cable?

Phil Thien

>Sure! Go to graybar.com and search for "underground splice" (there are lots of products--you may want to call your local office and see what they have in stock).

You should SEE some of the underground splices I've seen telcos do when contractors dig-up a cable.

About seven years ago I saw a contractor building a new bank branch office dig-up (sever) a pretty decent cable (maybe 200 pairs). SBC (local telco) came out and spliced it. Three days later (I'm not kidding), the same contractor dug the same cable up about twenty feet away. And severed it again. I was LMAO.

Re: splicing underground phone cable?

#3

Thats exactly why.......

Scott in Eastern Iowa

>.......your supposed to get the utilities located BEFORE you do any digging.

Years ago I helped build my wifes education shed out by the schools playground. They wanted a deck put on for the kids you see. Well volunteers showed up, but before we got there this teacher...now a well matured part timed agronomist, brought in his fancy tractor with the piling (boring) attachment on it and dug out all the support footings holes.

You guessed it....no utilities were located at all...even though he knows better and its mandatory here in Iowa.

Anyway...of the 4 rows x 3 holes per row, 3 in a row contained the main telephone line for the schools telephone and alarm system.

He never even knew he cut thru it....till the Supt showed up unannounced and looked in one of the holes.

I kinda wish I was around for that conversation.....

....the telephone guy wasnt too happy about fixing 3 cut wires in the 3 holes (only 6 feet apart) either.

Re: splicing underground phone cable?

#4

Re: splicing underground phone cable?

Larry Clinton At Frankfort (Central)., Indiana

>Yes, fairly easy to do. I used to use a "Medium voltage underground splice kit" purchased at my local electrical supply house. The splice kit had an elongated cover and base with rubber seals for the wire that entered in each end. After you make your splice (I would both crimp with a bare copper splice and solder then tape well), you lay it into the base of the splice container, snap on the lid then fill the container (through the provided opening) with epoxy that is supplied with the kit. I used it on underground UF romex carrying 120 Volt to outbuildings. The splice kit was actually rated for 15KV - but was the only one carried by the local supplier, cost (10-15 years ago) was less than $20. There are many different underground splice kits available - some for telecom use - others for low voltage (> 1KV). Do a goggle search for these - I saw some on the bay also.

Re: splicing underground phone cable?

#5

It could be worse.

Basil

>A young fellow just got in the grading business here. He bought a large lot and started grading it down a couple of months ago. He sold truck loads of dirt all over the place. He was doing well until he started leveling up the lot for the sale.

I started to school on tuesday afternoon to pick up the boys and was told not to take the main road, it was blocked. Seems the new grading fellow had knocked a tree down on the power lines that crossed the road, scambled a car up in the lines and they had the road blocked. No one was hurt, thank goodness. On wednesday afternoon I start to town to pickup the boys and there's eleven ma-bell trucks and two water/sewer trucks parked by the road. He had gotten his dozer stuck on the edge of the road and cut the water line and a fiber optic line. They worked in the hole all night and most of the next day to get things repaired.

Thursday afternoon when I went up the road to pickup the boys fron school he was pushing dry dirt over the muddy hole where they made the repairs. 20 minutes later when I came back down the road, his dozer was bogged down chest deep on top of all that stuff again. There were 2 ma-bell trucks and one water/sewer truck there already. This time he had only cut the cable TV line and an older 200 pair copper telephone line. My end of the county was without late afternoon soap-opera's. You know there were some mad women around.

I don't know if the young fellow had underground utilities insurance or not. But if he didn't, it's going to hurt.

Basil

Re: splicing underground phone cable?

#6

easy and cheap

Bill Tindal, E.TN

>The phone company just laid an underground cable to my house and in the process the digger broke a part and cut the cable. It looked like they used the same underground patch that is used for patching underground electrical cable, available at your full service electrical supply.

Re: splicing underground phone cable?

#7

Re: Thats exactly why.......

Ernie Miller

>I did a locate and it came back with a Ma bell OK all clear but I know my yard and knew there was a line burried thereo I called again and ask that they come mark the phone line they called me on the phone and said All clear no burried lines in you yard. I ask about the one from the castle in the back yard to my house they cane out and sure enough there was a line so they came out and marked it. I should have gone with the first OK and cut the line with the trencher and let them pay for the replacement of the line where I want it. But I knew it was there and couldn't cut it like that I ended up digging out 20 ' and moving it to the left 3' but that left me short. I could run it up into the sun room but I would rather run it to the basement where it was.

Re: splicing underground phone cable?

#8

Re: A note, so as not to surprise you...

Glenn Madsen near San Francisco

>The phone cable carries a -48v current on it, not very much, but enough to cause a mild tingle. That's how the system powers itself. Just be careful.

Re: splicing underground phone cable?

#9

Uhhh, Glenn

Derek

>48v is a VOLTAGE, not a CURRENT!

Current will only flow if there is a path for it...

I'm sure you know this, just could not resist razzing you though. :>)

Re: splicing underground phone cable?

#10

Re: Uhhh, Glenn

Glenn Madsen near San Francisco

>I keep telling myself to stay way away from discussions of electricity on the internet... ;-)

Re: splicing underground phone cable?

#11

At least you're right about the tingle...

Jason Roehl in Mulberry, IN

>Early on in my painting career, I remember I was painting a lady's living room, and as was our custom at the time, I removed all the switchplates and receptacle plates. I also pulled the phone jack, and because of the way it was on there, I was just going to take the whole thing off. As I was messing with the wires, someone called...got my attention. I've been shocked worse with other things (spark plug wire was by far the worst), but this was different--it didn't really cause the intense muscle contractions, it just HURT.

Jason

Re: splicing underground phone cable?

#12

Ringer voltage

Bill Howatt

>The ringer voltage is around 88V and is AC which is even more likely than DC to get your attention.

Bill

Re: splicing underground phone cable?

#13

Re: Ringer voltage

Phil Joines Krum, Tx

>105V, 20 hertz.