Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Learned a little about Gel Stain today

Posts

Learned a little about Gel Stain today

#1

Learned a little about Gel Stain today

Dustmaker Mike

>Ok so I should have know this but I didn't think.

I bought a kitchen table a few weeks ago at Goodwill. I striped the top and sanded it down. My wife wanted it stained a little darker (it is pine), So I got the idea that Gel Stain is the way to go and went out and got some Rosewood colored stain. I applied it with a brush let it sit the 3 to 5 minutes then Scrubbed it off with a Terry cloth towel. It looked like cr!@. So I did it again last night same way after letting it sit for 4 or 5 hours.

Some place in the middle of the night I woke up and said STUPID you should not scrub the stain off just lightly wipe it. Wow what a difference a bad nights sleep makes.

Re: Learned a little about Gel Stain today

#2

Dale Lenz

Re: Learned a little about Gel Stain today

Dale Lenz

>Hi Mike,

My first thoughts concerning staining a softwood is blotching. I usually, put a 1# cut of shellac on the softwood prior to staining so to hopefully get uniform color. If your next attempt does not work, as bad as I hate to advise: try to remove what stain you have applied and do the sealer coat thingy as mentioned above, then stain.

Good luck,

Dale

Re: Learned a little about Gel Stain today

#3

Re: Learned a little about Gel Stain today

George@Colonel's Workshop-Havertown PA

>Good Afternoon Mike,

Even my eyes glaze much more easily after a poor night's sleep and a gentle wipe!

George

Re: Learned a little about Gel Stain today

#4

The Devil is yelling in my ear right now.

Art Silva

>

Re: Learned a little about Gel Stain today

#5

Re: Learned a little about Gel Stain today

Dave in Haverford, PA

>I just refinished a pine drop leaf table. What I learned (by reading Barley's brochure) really worked well. After sanding, apply a coat of gel clear varnish. Wipe off till nearly dry, then immediately apply the gel stain (Bartley's antique pine in this case). No blotches - looks great!