Epoxies,bottle caps and poker
Andy Lincoln,In Dearborn MI
>Hi All,
My current project is a poker table for my weekly game. I intend to use a pourable two part epoxy like those used on bars and restaurant table tops. Here is a possible layout:
Is this too many caps? Should I space them out? Is there one particular epoxy that is better than others? I am intending to pour a thin 1/8� or so layer of epoxy and embed the caps in that before pouring 1 to 2 more layers to achieve a thickness +/- 3/8�. I intend to build a form around the perimeter to contain the epoxy and caps.
As you can see our friends to the North are
not too well represented ,nor are many of the regions of the US other than the plain,old Midwest.

I also may try and embed in some poker chips, playing cards, etc.
For those who would like to send caps, I�ll provide my address and pay postage as well.I need to get my friends to drink better/different beers and buy twist-offs as well!!
I also intend to build a leaf or two to accommodate a larger game or even the holiday dinners with family.
On line I found thisEpoxy . The
directions seem clear and straightforward.
Does any one have experience with this, or other epoxies of this type? I�m trying to get all the facts, tips, info etc. before I start mixing epoxy.
TIA,
Andy



