Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Dado or Groove

Posts

Dado or Groove

#1

Dado or Groove

Stephen Shepherd in the State of Deseret

>If the material is Man Made and has no grain can you call a groove a dado?

Stephen

Re: Dado or Groove

#2

Re: Dado or Groove - How about calling it a "Rut"

Larry Clinton At Frankfort (Central)., Indiana

>

Re: Dado or Groove

#3

You can call it whatever you want...

John in New Mexico

>the question is do you want to be understood?

More seriously though, I wouldn't think that the word groove is sufficiently descriptive. To me the word dado has more to do with the shape of the cut than the material its cut in.

John

Re: Dado or Groove

#4

Re: You can call it whatever you want...

Jesse in New Mexico

>Hey John,

I agree that everybody knows what a "groove" is. I think,though, that a groove is supposed to run with the grain and a dado across the grain.

For grainless material, I like the term the Aussies use a "trench" ;^)

Re: Dado or Groove

#5

could be...

John in New Mexico

>I do like trench though.

Back to the trenches!

John

Re: Dado or Groove

#6

Ol' Norm ALWAYS says dado . . .

s.mackay@worldnet.att.net

>with biscuts . . . for EVERYTHING ! God bless his heart .

Re: Dado or Groove

#7

or, in this case, a "housing" (no grain direction)

Andrew F in Australia

>Except for the New Yankee Workshop's influence and the American mags, the term 'dado' wasn't common a while ago.

It is now here,

However, the correct terminology here is that a trench runs across the grain and a groove runs along the grain. The generic term for the recessed joint is a housing.

Back to the trenches,

Cheers,

Andrew

Re: Dado or Groove

#8

You forgot the brad nails!

John in New Mexico

>

Re: Dado or Groove

#9

Plow or Trench?

Stephen Shepherd in the State of Deseret

>This is from a TOH episode when Mr. Silva called a groove a dado when it ran along the length of the material, PVC in this case.

I was taught a groove or plow ran with the grain and a dado or trench ran across.

Now lacking grain direction in man made materials does the same convention apply? I would think so. It is just easier for everyone to understand if the proper terms are used.

Stephen, splitting and pinching hairs

Re: Dado or Groove

#10

Hair splittingly

Andrew F in Australia

>Hi Stephen,

Trust that all is well.

As I alluded to in the post above, here it's called a housing when there isn't a grain direction.

Can't answer for the US terminology, however. Perhaps Sgian Dubh or others may know the local convention.

Hair splitting, I agree, but 'housing' is the term here.

Cheers,

eddie

Re: Dado or Groove

#11

Until the glue dries

Stephen Shepherd in the State of Deseret

>

Re: Dado or Groove

#12

I suspect...

John in New Mexico

>That this is a case of language evolving a bit. Presumably the reason for different words for a cross grain vs long grain groove would be that they required different methods to cut (with hand tools), and different methods to join and not fail due to wood movement. The requirements for making a successful joint could be communicated between workers by the use of the proper words.

With the advent and widespread use of grainless materials, dado cutters (& routers and shapers) that don't behave much differently on any of these materials, and largely self educated (and TV educated) workers, the distinction between dado, plough, groove, trench, and housing has become largely irrelevent. I would guess that the reason that "dado" seems to have become the most commonly used word -- in the US at least -- is because the most common way to cut one here is with a dado cutter on a table saw.

Semantically,

John

Re: Dado or Groove

#13

( snicker-snicker ! )

s.mackay@worldnet.att.net

>

Re: Dado or Groove

#14

Then does he remove the brads?

Stephen Shepherd in the State of Deseret

>