Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

compound Miter settings

Posts

compound Miter settings

#1

compound Miter settings

Mike hughes

>It's be a lomng time,

I am about to attempt to put Crown molding in a home. Several things worry me.

There is a vaulted ceiling the angle is 56 degrees or 34 depending how you look at it in the low corner to the top with a 90 on the right side.

What would the settings be for a lay flat, or, what would they be for the molding against the fence?

Is it better to put a block in the corner and miter to that?

I need 62ft. ordered 100ft hoping that would be enough.

I start the job on Monday the 11th, any answers to ideas would be very helpfull.

Thanks,

Mike

Re: compound Miter settings

#2

I use this diagram

Mark Goodall - ATL - tooljunkie

>I have this chart udner the "Charts" section of my www.happywoodworking.com site, and I always go to the internet and print off a copy before I head to my workshop to do crown molding.

I also have "Mark's Super Secret Crown Molding Formula" on that web page, but it's so secret that sometime even I cant' rememebr what it means. But them when I'm stading there in from of the CMS with the crown molding in hand, I remember.

I used to waste A LOT of molding before I wrote down this diagram and info.

Happy Woodworking!


img