Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Question - hinges - lid support for blanket chest?

Posts

Question - hinges - lid support for blanket chest?

#1

Question - hinges - lid support for blanket chest?

Larry Clinton At Frankfort (Central)., Indiana

>I am building a blanket chest for my DIL. It is a (modified) Mission style, White Oak - cedar lined. Trying to determine the best hinges for the application. The top is 3 panel solid oak 3/4 thick 24" deep X 48" long. I was thinking of using two or three drawn brass hinges - mortise style, 2 1/2" - 5/8 leaves but am concerned that the weight of the top may cause premature failure. Are these the best choice? Also looking at the top stop method. Don't know that the Brusso mortised box lid support is heavy enough - or is the chain style more suited to a mission style chest?

Re: Question - hinges - lid support for blanket chest?

#2

Re: Question - hinges - lid support for blanket ch

markfromsacramento

>I built a similar chest and used 4 no mortise hinges. I also installed 2 toy box lid supports (Lee Valley or Rockler) and they worked beautifully.

Re: Question - hinges - lid support for blanket chest?

#3

I used piano hinges...

Ellis Walentine, Host

>...for the toybox I made for my grandson. I used the Rockler lid stays and they did not disappoint.

Ellis

Re: Question - hinges - lid support for blanket chest?

#4

Re: Question - hinges - lid support for blanket ch

George@Colonel's Workshop-Havertown PA

>Hello Larry,

I agree with Ellis. Our #3 granddaughter Cora's Treasure Chest is slightly smaller dimensionally, but I too was concerned about lid support. I wound up using continuous piano hinge and top supports from Rockler. They are rated for weight ranges and work very well. I installed two of them on this project.

George


img

Re: Question - hinges - lid support for blanket chest?

#5

Re: I'm with Ellis on piano hinges

Kneale Brownson in Northern MI

>I made this blanket chest for a niece's wedding from 1-inch cherry and maple so the top was quite heavy. I used one of those solid brass piano hinges and two of the toy chest closers so there's no possibility of the lid banging anyone.


img

Re: Question - hinges - lid support for blanket chest?

#6

Re: Question - hinges - lid support for blanket ch

Mac in Indy

>Larry,

I made a Blanket Chest for my daughter's wedding present a couple of years back. I didn't like the look of piano hinge for this higher end piece so I went with some heavy extruded brass hinges from Lee Valley. That said I had a wide top rail and could accomodate them nicely. With a narrower top rail narrower hinges would be needed but then you could go with longer screws to secure them (but not in the top). I think if it's anything but a high end piece a piano hinge is fine and they are easy.

As for stays I went with the Lee Valley chain on one end. This won't stop the lid from slaming down, a concern for toy boxes, but it is a more traditional and elegant solution.

as an aside my daughter has worked in Frankfort the last 2 years while living in Lafayette. She did English Second Language work in the Frankfort Schools based out of Kieger Elementry. She has just moved back here to the Indy area with her husband. She really liked the folks at Kieger.

Mac

Re: Question - hinges - lid support for blanket chest?

#7

Forgot to attach the Pic 

Mac in Indy

>


img

Re: Question - hinges - lid support for blanket chest?

#8

Re: Thanks to all for the information

Larry Clinton At Frankfort (Central)., Indiana

>Sounds like I have several acceptable options. Will look over the hardware in the Marketplace vendors sites and figure out which I will use. Thank for all the help. Looking at Mac's chest reminded me, I could use larger hinges as I am lining the chest with cedar & will have a thick oak cap around the top rim. I'll let you know what I decide and how it turns out.

Re: Question - hinges - lid support for blanket chest?

#9

Re: Mac, two of my DIL's are teachers

Larry Clinton At Frankfort (Central)., Indiana

>in the local schools. One teaches at Suncrest in Frankfort, the other teaches at Clinton Prairie - just west of Frankfort.