Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Fencing gun!

Posts

Fencing gun!

#1

Fencing gun!

Mark Goodall - ATL - tooljunkie

>Thanks to everyone who responded to my post last week about a nail gun for fencing.

I went to HD to pick up some of the lumber last Saturday, and looked at the nail guns. Talked to a few people there who all said everyone uses galanized nails for PT fences around here.... those ACQ(??) rated nails that are ASM 153(???) rated..... just like many of you said.

I looked at their selection of nails and decided that a full round head (not clipped or the new offset round head) 22� plastic collated were by far the most popular and had the best selection of nails available.

I noticed that the PC FR350A gun, which I thought was $199 last year, was marked (up?) at $299? Wow, did they raise the price? I was pretty sure it was less.

Did a quick calculation between buy those premade 6'x8' sections of fencing compared to making them myself and saw that I could afford a gun.

I had no problem spending an extra $20-$25 dollars to buy the nail gun at HomeDepot, but I was pretty sure it was about $125 cheaper elsewhere.

I checked out Amazon.com and had just missed it when the price was $139 and then $169 and now the price of the same gun was $197, but they had a special for $185 that included 5 of the 7� blades, so I ordered that. I almost ordered the FR350MAG which has the magnesium body for about the same price, but noticed that it only takes nails 2-3/8" to 3-1/2" instead of the 2" to 3-1/2". I need the 2" nails to do the fencing.

I also noticed that the PC FR350A was the same weight (8 lbs) as all the other brands (Magnesium or not) at HD so I went with that.

I picked up the rest of the lumber last night and the gun and a box of nails are on a delivery truck headed my way right now.

Thanks for all your help.

Happy Woodworking!


img

Re: Fencing gun!

#2

Did I mention the gun was FREE? Quick Math!

Mark Goodall - ATL - tooljunkie

>Around here a prefab section of PT fencing that is 6' x 8' is $44.98. It's made with 17 x 5.5"x6' slats, and 3 x 2"x3" rails and 102 nails.

If I make it myself, I use 2"x4" rails (stronger) at $2.97/ea = $8.91

and 17 of the slats at $0.97/ea = $16.49. Oh, and nails are about $0.05/each so $5.10 for the nails (actually less if you buy larger quantities).

So that's $30 - a savings of $15 for each 8' section.

12 sections of fencing and the savings equals the cost of the nail gun. So by the time this is all done, the gun will pay for itself.

I love getting things for free.

Shhh... don't tell anyone, but 12 sections is a little more that I was planning on building for phase I of the fencing project, but that will be our little secret. I'll hit 12 sections in the next phase, later this summer.

Did I mention I love getting things for free?

Happy Woodworking!