Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

OT-My "Truck"

Posts

Re: OT-My "Truck"

#26

There may be a reason

Gary Camp, Bend, Oregon

>I never saw another 57 318 with a 3 speed stick. I think most if not all of the v-8s came with push button automatics in those days. The same first-reverse slider gear fit from 1935 or 36 all the way through 59. I got the one that lasted the longest out of 38 plymouth. Much better suited to being behind a flat head 6 cyl. I got to the point where I could pull into the driveway, jack and block the car, pull the tranny, tear it down clean and install the new gear (I carried a spare in the trunk) put it all back together again and be driving in less than 3 hours. I learned more from that first car than I ever thought I would.

glc

Re: OT-My "Truck"

#27

I learned something also.

Basil

>I use both terms, release bearing and throwout bearing, from time to time. This time I just happened to use release bearing. Now I know where the term 'throwout bearing' may have originated.

Re: OT-My "Truck"

#28

Re: Clutch-flight '53 New Yorker

Mark Mandell - Gone Round In Jersey

>Learned to drive on that car/tank. Clutch was fantastic in winter and dirt roads. Mom finally replaced it with a '63 Newport torque-flight push-button.

Re: OT-My "Truck"

#29

Re: '64 Slant-6

Bruce, a MN Galoot

>My first decent car was a 63 Dodge Dart, slant six, three speed on the column.

I don't know where else the Valiant was available, but they were common in North Dakota, my home.

Bruce