Carving out top of tree stump -winner!!
Brian Altman
>John E in SC had the winning idea to carve out the top of the log. The 2006 Corvette is on the way!!
I started out with a Skill saw making groves in the top and tried to chisel out the chunks. As the tree was just cut the wood was still wet and would not chisel out well at all.
Then I tried a drill with a rasp bit in it. worked OK but very slow.
Then I tried a router with a 3/4 " bit. Worked like a champ. Tilting the router and extending the bit as far down as it would go worked. I was able to rout out a bowl 5" deep and fairly straight down on the edge.
At times I think it was not the most safe way to use the router but with some care I was able to dig out a nice deep bowl.
Thanks to all who entered the contest!
Yugos will be sent to all who entered but did not win.
Brian



