Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Clear/natural finish for maple

Posts

Clear/natural finish for maple

#1

Clear/natural finish for maple

abs

>What would be the best clear/natural finish for maple coutertops that will not be used for food prep?

I'm looking for a finish that will leave as much of the light color as possible - but still provide some protection. I suppose this is going to rule out all the oil based finishes - is there a water based finish out there that will fill the bill?

Thanks

Andy

Re: Clear/natural finish for maple

#2

Waterborne poly for floors

Clint Searl, at the base of Haycock Mtn

>

Re: Clear/natural finish for maple

#3

Re: Clear/natural finish for maple

Kneale Brownson in Northern MI

>I've used Flecto (now owned by Rustoleum, I believe) water-based poly. It imparts virtually no color to the board, just a hard finish. If you want to make it really durable, they make a water-based flooring finish too, I think.

Re: Clear/natural finish for maple

#4

Re: Pricey  *LINK*

Mark Mandell - Gone Round In Jersey

>


KTM

Re: Clear/natural finish for maple

#5

Re: Cheaper  *LINK*

Mark Mandell - Gone Round In Jersey

>


Unaxcol

Re: Clear/natural finish for maple

#6

Re: higher & lower  *LINK*

Mark Mandell - Gone Round In Jersey

>


Homestead

Re: Clear/natural finish for maple

#7

Re: Clear/natural finish for maple *LINK*

JackLane

>abs

Give this stuff a try. It brushes and sprays well. Once it cross links, it's hard as a rock.

Target Coatings in quickly becoming the industry leader in water bourne finishes in the residential cabinet market. This water clear poly is great plus their Ultima Spray Lacquer is the best water based lacquer on the market IMO (and I've tried just about all of them). I've used these products a lot over the last three years in my cabinet shop and haven't had a finish fail yet. Good luck

Jack


Targe Coating's Super Clear Poly

Re: Clear/natural finish for maple

#8

Re: Clear/natural finish for maple

Lee Schierer - McKean, PA

>I made a bathroom vanity for my sonand his wife from maple. I used Varathane Diamond Floor finish on it. It stayed clear and if it is hard enough fo floors, it should work well on cabinets. It did almost no lifting of the grain. It was easy to work with. I bought mine at Lowes. It is only available in gallon size.

Lee


img

Re: Clear/natural finish for maple

#9

Re: Clear/natural finish for maple

David Harker

>nice vanity!

I'm currently applying Minwax Polycrylic (their water-based poly) to maple dressers I'm building for my sons.

I'm using satin, to keep the appearance as natural as possible.

The result is great, very little or not discoloration or ambering.

I cannot comment on the durability, I've never used this product before.