Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Question - Wedging and extended through tenon

Posts

Question - Wedging and extended through tenon

#1

Question - Wedging and extended through tenon

Stephen Kirk in Quakertown PA

>I'm getting ready to assemble some through tenons in which the tenon extends about a 1/4" out of the mortise, giving that sort-of trestle look. I had considered wedging the tenons (especially since my mortises wound up a hair wide), but I was worried about snapping off the ends of the tenons with a full 1/4" extended. The tenons are maple so it's good and strong. I guess when I do a wedged tenon I normall have an 1/8" or so exposed anyway and they don't break, so maybe I'm worrying about nothing.

Anyone done this before? It sure would be a nice way to get rid of my gaps.

Re: Question - Wedging and extended through tenon

#2

Re: Question - Wedging and extended through tenon

Bob McGovern

>As long as your wedge inserts parallel with the tenon's grain, you will not snap anything off. A clothespin-style wedge, which saddles the tenon, would; so would a wedge that passes through the tenon at a right angle. But if you are just foxing or jamming the tenon with a sliver wedge, you're fine.