Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Where Hardwood Lumber Comes from 2

Posts

Where Hardwood Lumber Comes from 2

#1

Where Hardwood Lumber Comes from 2

Bill Tindal, E.TN

>Clarification of Part 1

(This paragraph belongs with Part 1 It is a clarification of a point.) A tree that is struggling because it is too cold, too dry or the soil is poor doesn't shed its limbs quickly. It is more prone to disease and its injuries don't heal quickly. To get clear lumber the young tree and its neighbors must grow fairly quickly so they reach for the sky, and they must compete with each other for space. Shade from the forest canopy of dominant trees will kill their lower branches, and in the warmer Appalachian climate these dead branches rot quickly and fall off. Fairly rapid growth of the tree will heal over these branch scars before rot proceeds into the trunk. Once the branches have fallen off and the scars healed, the trunk makes the clear, knot-free lumber we desire.

Part 2 Logging

Logging begins with the contract between the owner of the timber and the saw mill or an independent logger supplying logs to saw mills. I am frequently asked, How do I sell my timber?� A reliable answer is to contact your state forester. The forester will at a minimum provide a list of companies buying timber. A second question is, �what is my timber worth�? That depends on many factors- quality, accessibility, anticipated market price for the lumber, integrity of buyer and ignorance of seller. An approximation would be about 50% of the price of logs delivered to the mill, which we will see later is a small fraction of retail price for FAS lumber. A call to a mill will get you a current price of delivered logs. A harvested prime Pennsylvania cherry veneer log could fetch more than $10/bdft while a beech log will bring only $0.30/bd.ft. With this kind of spread in value one can see that an ignorant owner of timber has the opportunity to be taken advantage of by a knowledgeable timber buyer. Never-the-less the buyer is still making an educated guess of the value of the lumber the logs will yield. It is not uncommon for the logs to turn out poorer quality than anticipated when they are sawed, or the market suddenly change as it recently did for red oak, plunging the price of logs to half their former value. It is far more common for a person who has not sawed lumber to greatly underestimate the number of knots and other defects that lay beneath the bark of what appears to their untrained eye to be a �clear� log.

Logging begins with the building of skid roads and clearing and leveling an area for loading the log trucks. This is typically done with a small dozer. Then logging can begin, an activity that occurs all year in my area. Sloppy loggers can make a mess of a woods leaving skid roads to erode and remaining trees damaged by skidding and felling. But, even under the best of circumstances a logged woods is not a pretty sight.

When I was a kid I carried water and supplies to a pair of French Canadian loggers in the Adirondacks. They skidded trees with a single horse that spoke only French. I used to remember Gee and Haw, horse talk for right and left, in French. Yes, the horse was guided through the forest with only oral commands. It was fun to watch but way slow by modern standards. Later in the last century logs were skidded with a small bull dozer and winch which was still slow by modern standards. Now logs are skidded with the nimble device shown in the first picture. One or more logs are hooked with a cable off the back of the skidder. A winch pulls the logs to the skidder, lifts the log end up off the ground and away it goes to the loading area. The blade on the front is handy for pushing brush out of the way, or bunching up logs.


img

Re: Where Hardwood Lumber Comes from 2

#2

contunued

Bill Tindal, E.TN

>With the aid of the skidder and truck with a log loader shown in this picture it is practical for a single person to do logging. The small boundaries of timber located on private land in our area are most often logged by a lone logger. This person will cut some trees, remove the limbs and then skid these trees to a loading area. Here they are cut to length for optimum yield (8-16�), loaded onto the log truck and hauled to a local collection point or directly to the mill. One load of about 3000 bd.ft. is a typical days work. It is a hard dangerous way to make a living.

I often hear people fret over the �wasted� logs left in the loading area when the logger moves out. If this stuff could be sold at the mill it would have been hauled away. These remains are unmarketable for a variety or reasons- rotten centers, severe crooks, foreign material (nails and the like), etc.

Next week Part 3 will cover the log yard followed by the saw mill in Part 4.


img

Re: Where Hardwood Lumber Comes from 2

#3

Re: contunued

Pat Mulligan

>Thank you Bill. Looking forward to the next one.

Re: Where Hardwood Lumber Comes from 2

#4

Re: Where Hardwood Lumber Comes from 2

C.W.Stivison

>I would add if someone has trees to sell to get at least 3 bids from loggers and to check references or visit their current logging sites.

CW

Re: Where Hardwood Lumber Comes from 2

#5

Re: Where Hardwood Lumber Comes from 2

Randy Johnson Connersville, IN

>"It is not uncommon for the logs to turn out poorer quality than anticipated when they are sawed"

I saw that when they logged the woods near me. There was one log with about ten feet of trunk (Think it was oak, but it might have been cherry) that had about a one foot diameter hollow right in the middle starting at the bottom. It would have been impossible to see when the tree was standing. They left it behind and a neighbor converted it to firewood.

They cut one cherry tree that was so crooked I can't imagine it being used for anything but a thirty foot long wooden corkscrew. It wasn't even much in the size department. At the same time, they seem to have left several that look at lot more harvestable - straight and large with no limbs, as Jerry Clower would have said, "for a while". They may be back next fall after the crops are in to finish the job.

Between a neighbor cutting firewood and me getting fodder for the lathe the woods will probably get a little better cleaning than is the norm for logging operations around this part of the country.

Re: Where Hardwood Lumber Comes from 2

#6

Question on climate

Randy Johnson Connersville, IN

>Bill, you mention the warmer Appalachian climate and how it helps the growth of the tree. When logging in mountains is there a cut off point where this is no longer true? Are trees in the valleys as good as trees at say 4000 feet?

Re: Where Hardwood Lumber Comes from 2

#7

It is more comlicated

Bill Tindal, E.TN

>There will be an ideal range of elevation (really, an ideal range of climate) for each species. But it is not elevation that is important but the soil, moisture, temperature, etc that correlates with elevation that is important. Here in TN the cherry that grows at 1200 feet elevation is not optimum quality and I think it is more complicated than just how fast it grows. However, the cherry at 3000 feet is good and then it peters out at still higher elevation. The mountain tops here are above timber line (around 6000') and no trees grow up there, or at most scrubby fir like one finds 900 miles north at 3000' elevation. There is a ridge in front of my house (at 1800') and the cooler north side has a nice stand of maple ( a cool loving tree) while the south side is almost entirely oak, a species that is more tolerant of hot and dry.

Re: Where Hardwood Lumber Comes from 2

#8

GVW?

Tom Sontag - St. Louis

>Nicely done again Bill. That truck looks a lot like the one we use to gather urban logs, although the crane is on the front in yours and you have an extra axle. The first thing I noticed was the taller bunks and I wondered how much weight that thing was licensed for. Surely the fourth axle helps, but I'd guess its more than the 60,000 pounds we carry.

We also use cab and trailer arrangements for longer hauls that can hold 4000bf or so.