Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Stupid congealed Waterlox...

Posts

Stupid congealed Waterlox...

#1

Stupid congealed Waterlox...

Scott in Douglassville

>Ok, Waterlox is about my favorite finish, but I've never gotten through a can of the stuff before it congealed into a glob of cold gravy. Just happened again, when I was fixin' to finish some boards I'm making for someone. Now I'm defaulting to shellac, as there's no way I can get any more Waterlox in time.

Anyone have hints for how to keep this stuff liquid?!

grumble grumble

Re: Stupid congealed Waterlox...

#2

Dale Lenz

Re: Stupid congealed Waterlox...

Dale Lenz

>I'm assuming Waterlox is similar to Gillisie "Tung oil" a wiping varnish and the following is what I've learned to do and has worked for years of finishing.

When you haved use approx. 1/4 of the volume of varnish in a container, pour off into a smaller contain. Keep doing this as you use 1/4 volume of that contain and so on. Look for folks with young children, as in baby food jars.

Re: Stupid congealed Waterlox...

#3

Re-bottle it...

John in New Mexico

>First time I bought a gallon rather than a quart, I filled a bunch of peanut butter jars right up to the rim and screwed the lid down tight. Lasts years this way. When its time to open a new jar, the top is usually glued on pretty good, so I punch a couple holes in the lid with a nail, on opposite sides like an old beer can, and decant the contents into smaller jars.

John

Re: Stupid congealed Waterlox...

#4

Re: Stupid congealed Waterlox...

John Pappas

>Scott, any varnish or poly will also do the same thing. Above suggestions are standard solutions. Also, Bloxygen, can be used. It is an inert gas that replaces the oxygen in a partially full can of finish. (Got mine from Rockler) Squirt it into the container for a couple of seconds before putting on the lid. I recently purchased some and am trying it, so I can't speak from experience yet. It should work for the Waterlox also since it is basically a varnish mix, I believe.

Re: Stupid congealed Waterlox...

#5

Bloxygen helps a bit

Chad Pearson

>Even using bloxygen I still think Waterlox congeals quickly [although Bloxygen helps considerably]. Decanting to a small bottle works best.

BTW - The company that sells Bloxygen also markets the same product as "Winesaver." It is sold in liquor stores in a purple bottle. It seems to sell for about 2-3 dollars less per can than the Bloxygen.

Re: Stupid congealed Waterlox...

#6

Re: Stupid congealed Waterlox...

George@Colonel's Workshop-Havertown PA

>Good Evening Scott,

I always buy the smallest container available, and try to use it up before opening another. I disliked using a finish which was almost going over the hill, or having to toss a solidified canned chunk of varnish. Now I use only fresh materials and toss out what remains. To be sure, larger containers sell for less cost per ounce, but the over the hill stuff is 100% waste: the most expensive way to go, in my opinion.

George

Re: Stupid congealed Waterlox...

#7

Straightforward solution

Bill Tindal, E.TN

>Any of the "oil" based finishes cure by reacting with oxygen. If exposed to oxygen they will react whether the solvent has evaporated or not, as you have discovered. The solution to your problem is to prevent oxygen from dissolving in the unused finish. Suggestions: Pour out only what you need and do not return any of this finish to the finish that you intend to store. Displace all the oxygen from the container that will store the remaining finish. A conceptually simple way of displacing all the oxygen is to transfer the unused finish to a container that will wind up filled with finish, and hence no room for air. Or displace with an inert gas that does not contain oxygen.

I have successfully stored oil based finishes for 20 years without them gelling, providing all the oxygen is excluded..

Re: Stupid congealed Waterlox...

#8

Add pebbles to make up for usage

David Barnett - SW Florida

>

Re: Stupid congealed Waterlox...

#9

A Waterlox story

Ellis Walentine, Host

>As most of our long-time visitors know, Waterlox is my favorite finish. I've been using it since the 70s. Like you, I have had to toss some out occasionally because I failed to decant it into smaller jars. But recently, when I was cleaning out the basement of my family home, I found a couple small bottles of Waterlox that my father had filled before his stroke twenty years ago. The Waterlox was as fresh as if it had come from a new can. (Not only that, it was the original pre-VOC-era "Transparent" formula that I grew up with.)

Anyhow, I second all the advice about small jars. I have a box of baby food jars full of Waterlox on my back bench at all times. As long as you only work from one at a time, your downside is only a couple ounces of the stuff; and if you put it into smaller jars or film cans, you can save every drop.

Cheers,

Ellis

Re: Stupid congealed Waterlox...

#10

my waterlox story

jared

>I got started using waterlox on my turnings a couple of years ago. I had a quart can of it this winter, that I was using out of almost daily. This went on for a couple of months. One day it was just fine, when I tried to use it the next day what was left of it, about a fourth of the can had turned in to jello. Hard to believe that it would go bad that fast. I always wondered how it could happen like that. Jared

Re: Stupid congealed Waterlox...

#11

Ric Taylor

Re: Stupid congealed Waterlox...

Ric Taylor

>Only the congealed layer on the top is bad, what is under that crust is still good. Simply use a pipette to poke through the jello layer to reach the good waterlox that is below. Draw up the good waterlox and squirt it onto your work surface or on to a rag, and you're in business.

I've been using the same waterlox that I poured into a jar about 2 1/2 years ago using this method. The crusty layer is getting pretty thick, but the liquid below still makes a great finish like it was freshly poured out of a new can. I have several friends that are doing the same thing.

I bought a pack of 100 pipettes on eBay for a dollar. Don't throw away waterlox that is still perfectly good.

Ric

Re: Stupid congealed Waterlox...

#12

Sometimes my small jars do that....

John in New Mexico

>sometimes they seem to gel all at once. Wierd.

John