Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning.

21 May 2007 (sheesh...time sure flies)

I hope that everyone had a good weekend.

I'm still working on the kitchen table project and trying to figure out the best way for me to veneer the curved skirts of the table. I can already tell you that I don't have enough clamps....so I may have to figure a way to vacuum them.

It was family day on Sunday. I didn't play bass on Sunday as it was my time to have a Sunday off. Watched a movie with the family and then we went outside and played....yup....frisbee. Do you know how long it's been since I did anything with a frisbee?????? Well, we all had a good time anyway and we plan on doing it again.

Today it's back on the kitchen table project and I hope to get some time to spend on the lathe today.

So what did YOU do this past weekend???

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

It's Victoria Day!

Jim Shaver - Oakville, Ontario

>Hey,

It's Victoria Day, aka the May 2-4 long weekend, well not quite the 24th, but close enough eh!

Fireworks and a neighbourhood street party last night....it's now offical, We can plant our gardens!

Take care,

Jim

Re: WC Weekend Accomplishments.....

#3

Educate a Heathen . . .

s.mackay@worldnet.att.net

>Since you mention it . . . whats Victoria Day ?

Re: WC Weekend Accomplishments.....

#4

Re: Educate a Heathen . . .

Bill Howatt

>Holiday in Canada named after Queen Victoria - part of the Brit heritage stuff. May 24th in the old British Empire used to be called Empire Day. In Quebec where the Brit portion is less kindly looked upon they now call it National Patriots Day and prior to that Dollard day named after a French person who in 1660 supposedly held off an Iroquois advance and saved the fledgling colony but not his life.

May 24th is the first "summer" long weekend and is the cottage opening weekend if you have one. It is also seen as the time in many parts of the country where you can safely plant your garden. You can, but until global warming does a bit more warming, you have to watch the thermometer at night. Smart or lazy gardeners in many regions wait until after the full moon in the beginning of June.

Bill

Re: WC Weekend Accomplishments.....

#5

Frigid North

Lee Schierer - McKean, PA

>We planted some garden this weekend, cold hardy plants and some seed crops, tender plants will stay in the green house for another week or so. Good thing too since we had frost again this morning.

Lee

Re: WC Weekend Accomplishments.....

#6

Re: WC Weekend Accomplishments.....

David Hay @ Denver

>Sadly, no woodworking this weekend. However we did get our daughter's room painted and got some work done around the yard.

David

Re: WC Weekend Accomplishments.....

#7

Montreal On Friday

Howard In Toronto

>Back to Toronto this afternnon.

Good timing each way - 120km/hr - thank heavens for cruise control.

Obligatory pilgrimage to Schwartzes, local beer, showing the boys the city, turning Michael loose on the city with his three years of French immersion under his belt, interesting show at some art gallery - Walt Disney and the literary sources he drew upon - BUT - noticed the art gallery across the street when we left - MID-CENTURY DESIGN!!! - aarrgghh!!!!

All in all a great weekend.

Howard

Re: WC Weekend Accomplishments.....

#8

New Wall Clamp Rack Following Flooded Shop

George@Colonel's Workshop-Havertown PA

>Good Evening Dennis,

You have to admire the people who invented lint traps, because the traps work very well. The truest and most dedicated fan of these devices are appliance repairman. When I woke up and found I had to swim over to my SCMS, I had a hunch something was wrong. Water soaked cherry on just-glued panels intended for our bedroom chest-on-chest provided another clue that something was wrong. The washing machine squirted water like the Trevi Fountain in Rome. SWMBO was enraged when wood shavings floated onto the pile of clothes on the floor in front of the dryer. I guess that made it MY fault, as the shavings came from my stuff. A further complication resulted from her forray into the space beside the washing machine, ostensibly to mop the floor. She brushed up against one of my 8 foot bar clamps and set it crashing into her right shoulder, hardly breaking the skin. Close examination revealed no damage to the clamp, and she became even more agitated when she heard my sigh of relief. (The clamp probably floated in the flood and became dislodged.) She called an appliance repairman while I retreated to have lunch out close to a favorite hardware store. It was a good lunch and I had a couple enjoyable beers with the owner of the Hardware store. I arrived back home just in time to hear the appliance repair man explain to SWMBO how lint traps trap lint. This was not a good lesson to present at the time, and he left very quickly with a huge check and burning ears. I spent the balance of the day with a mop.

I was compelled to build a clamp rack the following day. The cherry panels are drying out, and I hope I can still use them. HaVE A GREAT WEEK./

George

Re: WC Weekend Accomplishments.....

#9

Lint trap on a Washer?

Todd O. Cronkhite Maine Native, Presently Away

>Gee Colonel, sure sounds like you had a harrowing weekend. Man, wet cherry glued up panels, how much can a man endure? ;~)

I didn't know that there are lint traps in a washing machine, where are they? I might need to check mine as well. I'm diligent with the one in the dryer as I don't want a fire and, afterall, the washer and dryer are sucking up space in my shop/garage. there really is no Justice in this world. Do you know how many tools I could put in the same space they consume? It's sickening.

Glad to hear that there was no damage to your clamp, and that the Mrs. is alright.

T.O.

Re: WC Weekend Accomplishments.....

#10

Wow?

Mark Goodall - ATL - tooljunkie

>So the lint filter got clogged and forced water up and out of the washing machine onto the floor? That's terrible. I remember my mom's washer did that once, but the water deposited outside was measure in ounces, not hundreds of gallons.

Sorry you had to go through that. Glad to hear the clamps didn't hurt anyone.

Happy Woodworking!

Re: WC Weekend Accomplishments.....

#11

Mesh and fingers

Mark Goodall - ATL - tooljunkie

>The lint filter (in all the dryers's I've owned) is mesh but the filter in my washer(s) have been a series of vertical plastic fingers and the water flows between them trapping the link. I think that's only one design, I suspect there are other. On some (mine at least) the filter is cleaned out automatically when the water reverses direction at the end of the cycle and the lint goes to the drain.

Happy Woodworking!

Re: WC Weekend Accomplishments.....

#12

Re: New Wall Clamp Rack Following Flooded Shop

Larry Clinton At Frankfort (Central)., Indiana

>Sorry to hear you had the problem Colonel. Hope the Cherry comes out ok. It sounds like the washer repairman had a line of bull. I installed and repaired many washers in my time. Have a fairly decent knowledge of their operations as the company I worked for made the timers that controlled the operation of the machines. The "lint filter" on every washer I have ever seen is not accessible to the user. These are a coarse filter that backwashes it's self every cycle. I have seen washers with a sock stuck in the filter that didn't overflow like yours. I would suspect something else went wrong. May want to keep a close eye on it for a while.

Re: WC Weekend Accomplishments.....

#13

Why, thank you ! Broaden my horizons !

s.mackay@worldnet.att.net

>