Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

The LOML has requested I buy a new shop vacuum....

Posts

The LOML has requested I buy a new shop vacuum....

#1

JL

The LOML has requested I buy a new shop vacuum....

JL

>The stores where such are available around here are Lowes (Shop Vac) and Home Depot (Rigid). There are a couple of building supply companies and one hardware store (and Wally World).

The Rigid shop vacs get reasonable reviews. I am thinking of either the WD 1850 or the WD 1450. I do not need it for dust collection, just clean up.

I have a small Shop Vac that fits my plunge router quite nicely but is too small to use for floor vacuuming. I also have a Sear 12 gallon that took a dive off the roof and cracked its top - this is the one that is being replaced.

Re: The LOML has requested I buy a new shop vacuum....

#2

Re: The LOML has requested I buy a new shop vacuum

Nelson

>Bought the WD1540 a week ago and so far its ok, quieter than old one and a lot easier to empty.

Re: The LOML has requested I buy a new shop vacuum....

#3

Re: The LOML has requested I buy a new shop vacuum

Phil Thien

>I love my WD1450. I actually use it as my primary dust collector because all my tool ports are 2.5" or less. It is quiet. It has lots of suction. I use bags and HEPA filter so it doesn't polute the air. I use a cylonic lid to keep from having to buy too many bags.

Re: The LOML has requested I buy a new shop vacuum....

#4

Re: The LOML has requested I buy a new shop vacuum

Lee Ohmart

>Go for the Rigid. I have a friend that works at HD. He said they're warranteed for life.

Re: The LOML has requested I buy a new shop vacuum....

#5

Re: The LOML has requested I buy a new shop vacuum

Michael Wilkins

>Just got my latest issue of Fine Homebuilding magazine. They have a test article on tool triggered shop vacuums. Great article. I have the Porter Cable 7812 and it is a fine machine. The top tool in the article was the Festool. If I had to start over, I would go the Festool route, but I'm still happy with the PC.

Re: The LOML has requested I buy a new shop vacuum....

#6

Re: The LOML has requested I buy a new shop vacuum

Paul Dwight

>Within the last year or so, ShopVac has come out with a line of vacuums that's a lot quieter than the older versions. Lowe's carries both the quiet vesions and the noisy versions -- look at the box to be sure which one you're seeing.

I bought one of the quiet ShopVacs about a year ago to hook to my CMS until I could run duct work over from the cyclone DC. It's still hooked to the CMS, and I also periodically drag it around for general shop cleanup. Works great. I think it's quieter than my much-more-expensive Porter Cable vac, and I think it has better suction than the PC, as well. It doesn't have a tool-triggered auto start switch like the PC, but I have a $20 switch from Sears that takes care of that issue.

I don't know how the ShopVac compares to the new Ridgid vacs, but I like mine.

Hope this helps! -- Paul

Re: The LOML has requested I buy a new shop vacuum....

#7

Is that a new generation of QuietVacs?

Mark Goodall - ATL - tooljunkie

>I remember seeing and listening to the new (at the time) QuietVacs (IIRC) from ShopVac at Lowes a few years ago. They were considerably quieter than the ShopVacs that I had (bought 8-12 years ago).

I haven't been looking at vacs for a while. Has ShopVac come out with a new generaton of quieter vacs? Now that my young kids are working in the workshopw with me, and we're fumblign around with 3-4 sets of hear protectors, I think a quieter vac might be a good idea.

Also, pretty much everyone is really tired of coverign their ears, locking themselves in their bedrooms, or running out doors everytime I fire up one of the ShopVacs in the house to clean up a renovation task.

Happy Woodworking!

Re: The LOML has requested I buy a new shop vacuum....

#8

JL

Re: Bought the WD 1450..

JL

>

Re: The LOML has requested I buy a new shop vacuum....

#9

Re: Bought the WD 1450..

Dutch

>Hi,JL,

check out ABCvacuumwarehouse.com.

dutch.

Re: The LOML has requested I buy a new shop vacuum....

#10

Like this one *LINK*

Paul Dwight

>According to the person who wrote the sales literature, this model is "50% quieter than comparable wet/dry vacs." From my experience, the 50% claim is probably justified. The difference is not subtle. -- Paul


Quiet Shop Vacs at Lowes