Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

A couple of new projects

Posts

A couple of new projects

#1

A couple of new projects

Tom Stockton

>Hi All

Here are a couple of new projects I finished for clients in the last month or so.

The first is a vanity made of palm wood interesting stuff with nasty splinters it come in 30 x 72 sheets which for this project worked well but for others would seem to be an inefficient size.

Nothing fancy for construction the drawers are purchased dovetail units riding on blumotion slides. The piece looked nice in my shop but when installed it looked really good.

The best part of the installation was that the crew who did the stone work did such a nice job that everything fit perfect and no scribing was necessary.

Tom


img

Re: A couple of new projects

#2

second piece

Tom Stockton

>This is a stereo cabinet, pretty sleek contemporary design. The wood is reconstituted wenge veneer which is (I believe) african mahogany sliced, diced and dyed to look like 1/4 sawn wenge for less money and it looks real good although some people like to dye it with dark walnut stain. I didn't do this because the clients didn't want ti any darker. I also didn't know that wenge iron on edge banding was available but it is and not all that expensive.

After I made and delivered the cabinet it was decided it was 8" to tall so I took it back cut the 8" out, kind a stressful but it went well and you can't tell it was shortened.

The piece matches 15' of floor to ceiling CD cabinets that are almost full already with a pretty cool collection of music.

Tom


img

Re: A couple of new projects

#3

JL

Re: How is the palm wood to finish?

JL

>Does it "soak" up a lot of it?

Re: A couple of new projects

#4

Couple questions

Ellis Walentine, Host

>What are the panels in the doors? And where did you take 8" off the height?

My first reaction to this piece was that it needs some more visual weight at the bottom, at the least a plinth or rail or something to get it up visually a bit more off the floor. What do you think? I would like to have seen it in its original incarnation, too.

Nice looking work on both projects, though, Tom. The palm vanity is sweet. Does that palm come laid up on plywood or something? I've only used it in the solid for turning. As you say, it is splintery stuff.

Ellis

Re: A couple of new projects

#5

Re: Couple questions

Tom Stockton

>Ellis,

Your right originally it had a 4" base so 3" came off the bottom and 5 out the carcase. The doors are the recon wenge on MDF mitered and bisected, I had to remake these also, luckily the being to tall wasn't my mistake. The panels are glass.

Tom

Re: A couple of new projects

#6

Re: How is the palm wood to finish?

Tom Stockton

>JL

The first coat soaked in pretty well but once sealed it was fine.

Tom