Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

You were right Ellis...

Posts

You were right Ellis...

#1

JL

You were right Ellis...

JL

>The coated melamine that they had available had too much "ghosting" and was not suitable for a dry erase board. I'll have to go with "plan B" as suggested by Andy Lincoln. Well, at least I had the foresight to take a marker and try it out - and I did pick up the 8/4 oak that I needed so it wasn't a wasted trip.

Re: You were right Ellis...

#2

Whew. Dodged a bullet! :-)

Ellis Walentine, Host

>

Re: You were right Ellis...

#3

JL

Re: LOL!

JL

>Though they did have a few varieties. They were kind enough to let me mark a few edges.

Re: You were right Ellis...

#4

I must have missed....

George (Oxford, NC)

>the original post, but, I have found a free (with a little work) very good dry-erase board material. Go to the dump with a pair of good tin snips and get the side panel off of a refrigerator or other appliance. The enamel coated panels work great for dry erase.

George

Re: You were right Ellis...

#5

JL

Re: Father John wants...

JL

>a 4' x 6' panel (reversible).

Re: You were right Ellis...

#6

I've never tried it..

George (Oxford, NC)

>but would the porcelon stuff that tub refinishers spray stick to MDF or MDO and would it accept dry-erase markers?

George

Re: You were right Ellis...

#7

Re: Father John wants...

Curly Smith

>You might want to consider one of these products:

Dry Erase Boards - Wall Coverings