Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Looking for 8/4 Black Locust

Posts

Looking for 8/4 Black Locust

#1

Bart Goldberg

Looking for 8/4 Black Locust

Bart Goldberg

>Anyone know where I can score some 8/4 black locust - It can be rough sawn (preferred). I'm in the Flemington, NJ area. I've already checked with East Coast Log, Byran's Farm and Agincourt.

Thanks

Bart

Re: Looking for 8/4 Black Locust

#2

Look Here *LINK*

Dustmaker Mike

>Tell them you got this Info from Woodfinder


Wood Finder

Re: Looking for 8/4 Black Locust

#3

Bart Goldberg

Been there - done that

Bart Goldberg

>

Re: Looking for 8/4 Black Locust

#4

Re: Looking for 8/4 Black Locust *LINK*

Mark Mandell - Gone Round In Jersey

>I'd try Bucks County Hardwoods in Doylestown (215-230-7079). If no joy on the call, try Hollisters at the link. Chances are you're either going to have to sp/o request 8/4 or make it up out of 4/4. Either way, it's a road trip. Hollisters is in Columbia PA which is past Lancaster on Route 30 on the Susquehanna River. Pretty country; nice drive; 2 hours@.

Good luck.

mm


Hollisters

Re: Looking for 8/4 Black Locust

#5

Re: Looking for 8/4 Black Locust

Gary Evans Tallassee, TN

>Bart,

Does it need to be dry? What length do you need and how many pieces?

Gary

Re: Looking for 8/4 Black Locust

#6

Re: Looking for 8/4 Black Locust

Larry Clinton At Frankfort (Central)., Indiana

>Don't know what the quantities or if weight would preclude shipping from Indiana, but Hollingsworth Lumber - Russiaville, IN carries quite a lot of Black & Honey Locust. You might give them a call if shipping is practical. If you do be sure they check to insure its black instead of Honey locust, as we have gotten both from the same bin at their yard before.