Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Furniture ID, and damage

Posts

Furniture ID, and damage

#1

Furniture ID, and damage

Denis Ch�nard, Orl�ans, Ont.

>My sister bought a few years ago a whole dining set, including table, chairs, sideboard, etc. It was sold to her as having "curly elm" veneer on it.

A month or so ago, a contractor screwed up on some work, and the sideboard was damaged by water. Finish got mangled, and some areas of the veneer buckled. Now she paid a lot of money for that set (in the five figures), and wants the damaged piece to be repaired as close as possible to its original shape.

I checked with the local woodworking association, and got provided with three references, one of which does work on 24 Sussex Drive (our Prime Minister's official residence). The feedback she received is all over the place, some telling her that the piece isn't worth much to start with, and one (who actually saw the piece in the flesh) told her that the sideboard was "faux finished"! Unbelievable...

In any case, the piece appears to have been built by "Northern

Furniture Company, Sheboygan, Wisconsin". Given all the conflictual information my sister received, she doesn't know where to take it from there... Any help would be greatly appreciated, maker's reputation, value, construction techniques, lumber and veneer selection, etc.

Here's a picture to give you an idea...

If anyone can help she (and I) would be most grateful...

DC


img

Re: Furniture ID, and damage

#2

Re: Furniture ID, and damage

RK in Milwaukee

>Northern Furniture Co. of Sheboygan, Wi was in business between 1904 and 1949. Judging by one site I found on the subject it appears that the furniture is highly collectible. I would guess, and it's just a guess, that the veneer is the real deal and worth restoring properly.

Do a search on Google and see if you come to the same conclusion.

Good luck.

Ron Nelson

Re: Furniture ID, and damage

#3

Re: Furniture ID, and damage

s.mackay@worldnet.att.net

>Wonderfull peice ! Without " The Twins " opinion I'd be sure its more than worth restoring. Love to get my hands on it but I'm sure theres someone up yonder you would'nt have to ship it to. That said, for Lord's sake interview Craftsman very carefully before turning anyone loose on it ! Not a job for the average brother-in-law with a bottle of gorilla glue and tablesaw in the garage ! Good luck ! By the way - thanks for " loaning " us Mike Holmes on The Boob Tube. God, I love that guy ! He sure does'nt pull any punches. And he looks like he can punch !

Re: Furniture ID, and damage

#4

Re: Furniture ID, and damage

jmohnike

>I agree with the other replys, the restoration should be done by a professional. It does not look like a faux finish. With the amount of $$$ invested it will not hurt to add some more. A suggestion I would have is try and find someone who restores pianos, they are more costly, but will probably do a better job.

Joe

Re: Furniture ID, and damage

#5

We can't see the sideboards

Mark Goodall - ATL - tooljunkie

>Denis said the guy said the sides were "faux finished".

Now I wouldn't think that if the fronts were the real thing, they'd skimp on the sides..... I would think the whole thing is real, sides and front.

But is it possible, that some manufactures would do the visible tops and fronts one method and the sides in a lesser way? When was the last time you saw leather seats that were all leather and not just the seating surfaces.

I would hope, and think, the whole thing is real, but my mom used to restore old furnitnure and antique furniture (certainly not 5 figures mind you, this thread may be out of my league) and I used to help and I've seen a few cases where the sides (of very old bookcases, and a sewing cabinet IIRC) were done with an inferior veneer that the fronts.

Happy Woodworking!

Re: Furniture ID, and damage

#6

Re: We can't see the sideboards

Dave Arbuckle, Plano, TX

>"Sideboard" is what that piece of furniture is called. ;-)

Re: Furniture ID, and damage

#7

Huh.....?????

Mark Goodall - ATL - tooljunkie

>Oooops, well that just shows you I have no formal training in furniture, let alone furniture making.

We've (wife, parents, parents-in-law) always called that the dresser, or lady's dresser, and the taller narrow one the man's dresser or the man's armoir.

I've never heard it called the "sideboard". Perhaps it's time I crack open an book on furniture design.

Happy Woodworking!

Re: Furniture ID, and damage

#8

It's a class-thing.....

Mark Goodall - ATL - tooljunkie

>In an effort to try to educate myself somewhat, I re-read the original post more closely and realized this was DINING ROOM furniture.

I looked at the picture and (wrongly) thought it was bedroom furniture. You see, I've never actually HAD diningroom furniture, ever. I grew up pretty modestly and the only furniture we had was a table and 4 chairs and a couch, a couple of book shelves and a dresser in each bedroom.

Even today, the concept of furniture in the "dining room" is pretty alien to me. We don't even really have a dining room.

Thanks for educating me.

I still think "sideboard" is a silly name for it, even if it is diningroom furniture ;)

Happy Woodworking!