Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Where to buy Waterproof lid supports

Posts

Where to buy Waterproof lid supports

#1

Bart Goldberg

Where to buy Waterproof lid supports

Bart Goldberg

>My neighbor with a pool has asked me to make an outdoor storage chest to store pool his pool gear (rafts, etc.). I'm probably going to build it from plastic lumber. Here's my problem - I know where to get Stainless Steel hinges, but he wants me to add a lid support, like is often used in children's toy chests to keep it from slamming closed. I can't figure out where to buy a weather proof version. Any ideas?

Thanks

Bart

P.S> remove the 2 to reply

Re: Where to buy Waterproof lid supports

#2

Re: Where to buy Waterproof lid supports *LINK*

Lee Schierer - McKean, PA

>I'm not sure where to get them, but have you thought about the compressed gas lid supports like they use on tail gates on SUV's and Vans? The seem to last for years on cars.

Lee


Compressed gas support

Re: Where to buy Waterproof lid supports

#3

Re: Where to buy Waterproof lid supports

Larry Clinton At Frankfort (Central)., Indiana

>I wouldn't use a compressed nitrogen spring lift on the lid. From my sad experience - I built a heavy duty router table a couple years ago. I made the top (28" X 30" or so) very thick (2 layers of 3/4 baltic birch, 2 layers of 1/4" tempered Masonite, and laminated formica on both faces. Then I installed a Rockler plate & hung my 18 pound PC Speedmatic router on the plate. Needless to say it is pretty heavy. I have a latch lid support installed to hold it open, but it still is hard to lift. So I got the bright idea of installing the car lift - bought it at the local auto parts store. The problem is that the lift puts force on the top all the time - not just when it is lifted. After a year or so the top "Twisted" and one corner was up about 1/8". luckily, when I removed the lift the top flattened back out in a week or so.

Re: Where to buy Waterproof lid supports

#4

Re: Where to buy Waterproof lid supports

Lee Schierer - McKean, PA

>You can buy gas springs (correct name) with various load ratings, similar to lid suports, so if you size them properly you should have little distortion problem.

Lee