Re: Powermatic pm2800 drillpress- Is it worth Buyi
Herb Yost
>I've had one for three months now, but a knee operation and now vacation have limited my use. SO all I can give are first impressions.
The thing is rock solid. Asssembly was straightforward, but it is definitely a two-person job to lift the head onto the post. The only thing I had difficulty with was adjusting the laser crosshairs -- that was trial and error and several re-readings of the manual to finally understand what I had to do! But once adjusted, it's dead-on accurate.
The fence is kinda dinky compared with the quality of the machine as a whole. I guess it will be useful....pretty much the only thing I've used it for to to prevent spinning of a workpiece.
Another surprise was the roughness of the table surface and the miter slots. I sent about an hour smoothing them out.
I REALLY like the adjustable speed control. Except for the largest fostners and circle-cutters, I never would bother adjusting the belts around the pulleys. Just kept things at a middle speed. Drill speed relative to bit size and type really DOES make a difference.
The chuck is awesome. I wasn't sure how an unkeyed chuck would work compared with the traditional keyed chuck, but it is solid. You put a small drill on the thing and it looks like total overkill! There is plenty of metal to hold onto while tightening the chuck.
Hope this helps somewhat....if anyone has specific questions, Ill be happy to answer what I can.